Jump to content
Remove Ads

borini63

Free Member
  • Joined

  • Last visited

Everything posted by borini63

  1. Thanks for the tip. I tried to get a 12v source and I wired the brake switch direct from the battery,,,,after that I noticed the wire got very hot when I apply the brake pedal. So from where you got the 12V source....Is your switch wire get hot too....... When I did that I got the brake light to work but the wire that comes out the brake switch will get too hot.
  2. borini63 posted a post in a topic in Open Discussions
    I agree...it's all about money and finding ways to squeeze $$ off your pocket. Still we have enough layer of OZON.
  3. borini63 posted a post in a topic in Open Discussions
    Wow I don't know that.......I will get a Vintage License Plate Next year then to avoid painful testing next year........ I will double check on that anyway. Thanks for the tip. Jamal
  4. borini63 posted a post in a topic in Open Discussions
    Today Passed emissions and got it register for one year.....Tuff rules here in phoenix.....only Pre 67 are exempt from test. Reliable daily drive now....... Not bad numbers anyway.
  5. borini63 posted a post in a topic in Wanted
    I don't know if you still looking but I have couple of oil pans just sitting.(N/A Style, No turbo oil pans)
  6. Fixed my Headlight switch. Works nice now. Found a booster in ebay, bought it and installed it ......was lucky enough that the booster worked. Opened the turn signal switch and cleaned it. Still no brake lights. Bought new brake switch and installed it, also replaced both flashers and still no brake lights......checked all the grounds, still no brake lights. Still not sure what to do next!!!!
  7. Looking good for a first year Z
  8. I am using gwri8 (Greg) picture here....I have the same but in Black.........
  9. I have this set if you still looking. Jamal
  10. Just a heads up on my 70 240Z,My daily drive for the moment.......
  11. borini63 posted a post in a topic in Open Discussions
    Looks better stance wise.1" lower than stock.Like it that way.
  12. borini63 posted a post in a topic in Open Discussions
    Trust me I found a lot of areas needs to be taken care of.Start to buy weather stripping for her.Also brand new Brake master Cylinder and a very good condition brake booster(The old one has a broken pedal stud),calipers and lines(rusty lines)Also I installed a set of Tokico lowering springs while am at it..Now she is a good daily drive.
  13. Thank you Steve for the link. I will make sure to follow. Jamal
  14. Thank you for the reply and the tip. I pulled my headlight switch out and opened it up and cleaned it and adjusted the little connectors .Put it back .Also I changed the connector for the left headlight (burned out from the heat)and replaced the both Lt and Rt headlight fuses. Now I have a headlights and they are bright thanks to the 60Amps 280ZX Alternator. Just bought a Brake booster and it will go in when I get a chance. Now I am facing a problem with my brake lights .I will pull the turn signal switch and clean, I will replace both flashers with new brake switch and I hope I will have a brake lights. Thank You again.
  15. borini63 posted a post in a topic in Open Discussions
    I wish that too. I will just drive it for now in this condition......until I restore it or find a good home for her.
  16. borini63 posted a post in a topic in Open Discussions
    Looks little better I replaced the door and fender and mounted some ZX T Wheels with new tires.Also some other new parts..... .
  17. Looking for a brake booster(mine is broken from the pedal rod) and also looking to buy a Headlight switch( Mine not working for the headlights but works for the barking lights) Please let me know if you have. Jamal 602-433-1161 kuwaity63@hotmail.com Or just reply. THANK YOU GUYS.
  18. borini63 posted a post in a topic in Open Discussions
    Oh Gatcha.....The older ones brings more $$
  19. borini63 posted a post in a topic in Open Discussions
    Hi Bill... I did not understand (Dose it have washer repair on a hole) ...what do you mean ? Jamal
  20. borini63 posted a post in a topic in Open Discussions
    Williams this year is free rigistration for the Kenmeri,so I will bring her. For the Z I will ask 7K for it but if I paint it that will be way more..I got everything missing for it.Like Door panels, emblems, Original Radio, wheels,fender, driver door etc etc and the list goes on. Basically I bought everything I need to make it complete with some upgrades.
  21. borini63 posted a post in a topic in Open Discussions
    Ok..new post I just got some time to make this Z run.Needs to bleed the brake system and if that did not work then I will go with 280ZX 15/16 master. Just mounted a three piece spoiler,rear louvers and rear bumper guard.
  22. Maybe the hoses are not hooked good.There is a T fitting behind the grill...make sure it's in good condition.
  23. Yes see you there this year. Can you send a picture of your Z's? Just bought me a 70 240Z and I am still working on her. Jamal
  24. That will be the Skyline. Won last year (Best of the Show)
  25. Here is my three toys so far!!!
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.