ovenfood

I'll get a picture late but it's had a bit of a prang so the bonnet is no good. I don't mind helping to remove it and don't mind if you damage other stuff its first in best dressed as far as that goes if some one even wants a 2nd hand screen... I don't have an air compressor if you intend on using air tools I'll have to borrow one

@uras1 I remember just as I turned the pc off what you mean. there is surface rust, it does not feel like repairs have been done and nil immediately visible cancer Do you want a chunk or the whole thing? If I have to remove it I may ask for a bit more but if you want to do it I'm just off the highway north bris @funkenstien its... there.... @tez240k yup I was like its in one piece, also you do know 4 door and 2 door have different trim (otherwise I would keep it)

@uras1 cowl panel? @240ktoGTR LD28 crank well collectively both cranks have set me back a fair bit. one has been crack tested and came up clean but they have been sitting for a few years so they may need a polish. Last guy who asked "was" going to pay $600 so i spose around that figure is reasonable? @frankenstien ill check later

wow $200 and the reserve isn't met.... I've got like 3 sets i could bring to the US all polished up for $100 a piece

I'm in Brisbane and I am getting rid of my 4 door some time soon so if there is parts anyone needs just ask. Most of the car is crap but I have SS trims and like new door cards (somewhere) the engine is seized the manual pedal box I am keeping, but not the manual box I have a few steering wheels and the car (for the most part) is a massive ball of rust (see through floors and the like) Also I have L28 engines and parts and various other stuff like LD28 V07 cranks extractors bla bla bla that stuff I'm not really trying to throw out but if some one wants something like I said just ask. leon

Sorry not CA's they have more bolts :-( don't know why I was thinking it fit :S

RB + L + CA are all interchangeable from what I have seen. There may be more but those are the engines that I play with so thats all I know.

I've been wanting to use these on mine:> they are the "sports steel wheels" from the remodel 240k

series 1 280zx the series 2 280zx had what are some times referred to as snow flakes

WTF is that datsun badge from? violet? sunny?

is it a separate transfer case? if it is a stand alone box I'd GUESS yes? purely on the basis nissan don't like changing things. hell if not grab an RB20 box

rare car like that its either burnt parted or re-birthed in a land far far away. But I sincerely hope it comes back to you

OMG I'll race you with the 200B rules are we both have to have the throttle wide open by the time you get grip ill be doing at least 25km/h thats sooo cool though did you have to jump through lots of hoops?

yer the cradle is not the same as S130's run coil overs and C110's run separate coil to spring setup. Also those brakes are poo, they "work" but the pad is tiny as hell its almost half the size of the gen 2 S130's

cool find id hazard a guess and say those calipers are the same as a 79 S130 (280zx) if you wanted yours to look like a GTR and did the disk swap

^^ agree

sweet

Look what i found in the parts bin. You want? I don't have the rest of the badge..

They were sold as a 240k skyline as far as I know just as the C110 was a skyline and a 240k so was the C210 this (or so I am told) is a C210 badge.

Quote "IT NOW RUNS A NISSAN RB20DET ,5 SPD GEAR BOX AND R200 DIFF." "FRONT BRAKES HAVE BEEN MODIFIED TO 300ZX/R33 WITH BIGGER DISCS" "MICROTECH COMPUTER WITH HANDSET.EXHAUST IS FULL MANDREL BENT 2.5 INCH" Man that is hard to read.

thats either an RB20 or an L or RB with a RB20 top put on it...

yer but i also got a not to bad set of cpoys from there as well sooo.... unfortunately the good set got damaged..

i have some not so good copys :S

congratz