stony
Free Member
-
Joined
-
Last visited
Everything posted by stony
-
this is a pic of the first mod i did to convert to teh z 31 strut and 5 lug disc brake. -
these axles are suppposed to withstand 600hp+ drag race applications in a z car ;> -
-
-
-
-
fender mirrors are in the stock location -
i installed a large arizona z car radiator.... check it out here www.arizonazcar.com
-
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1858537293 im going with a nine inch 5 lug so these have to go. you can check them out on my website. they have about 15 passes at eth track and 100 miles on the street. still look brand new except for the lug marks
-
well im going with a nine inch so nevermind. my plans are to install a nine inch with 4.11 gears th400 with 3500 stall and transbrake ;> this should get my drivetrain almost indestructable and for sure get me into the tens maybe even low tens with some more booste
-
-
-
-
-
-
-
-
-
-
this is the before and after with the 680cc injectors stock booste -
i need a ring and pinion 4.11 or higher... dont need the whole diff just the gears ... anyone have a set they want to get rid of?
-
I need as much info as i can get on shops that sell parts to swap the manual gearbox on the rb26 to an american automatic. Im having lots of problems keeping ujoints in on piece with my current setup. Id like to go auto for drag racing purposes and i think and moderate stall will be easier on the rear end then a clutch. any info is much appreciated and mayber one of these days ill get the rb26Z down the strip in one piece and in less then 10 sec ;>
-
rb26 DETT running stock turbos at stock boost 11psi, upgrade trust FMIC upgraded injectors 680CC, SDS EMS, best run 11.1 best MPH = 123 mph !!!!!
-
-
