ctomkins
Free Member
-
Joined
-
Last visited
Everything posted by ctomkins
-
-
Yes I did modify the gas pedal. Much closer now. As far as selling it? I'm kinda riding the fence. Just got seperated. The old story. -
-
I'd go with Big Bad Orange (69-70 AMC)
-
So the idea is to have the vent hole in that baffled compartment. I wish I had a better grasp on the sidedraft carb situation. This is classic black magic story of who really knows how and why it works.
-
Great photos Tom. :classic: Much appreciated. Thanks.
-
Excellent info guys. Thanks. It sounds like I have to vent the bowls.
-
I heard installing a surge fuel tank might solve the problem.
-
My carbs (tripple Mikunis) are stumbling on tight right hand corners. The floats are at 6mm. Mikuni manual recommends 12mm. At present I'm using a Carter electric good for 4-8 psi According to my pressure reulator I'm getting 3.5 -4 psi. There seems to be lots of flow. I thought the second pump for whatever reason might help with the stumble and add redundancy. I'm wondering if my Holley pressure regulator could be the prob.
-
Anyone heard of or installed duel fuel pumps.? I'm wondering if it would give more flow besides having a backup.
-
I was thinking the same thing about the colour as target. My wife had a red Grand Am that everyone seemed to aim at. -
It's not as bad as it looks. The hard part is finding a door and one that's not rusty. I think I still have some Big Bad Orange paint left over. If I had the money those Road America guys have, No biggie!
-
-
Question. Will a 280ZX door fit a 280Z?
-
This is what happens when the novices brakes fade on a Heavy Camaro. %@#*
-
-
-
-
Well. I installed 3/4 Master and it's still too stiff and I'm not taking that pedal assembly apart again :knockedou What's the story on slave cylinder? Does Nissan offer different sizes or is there an aftermarket bolt on? Also anyone know what size the stock one is?
-
Those are Ground Control springs -
It turns out the master I'm using is 7/8" Way... too big. It worked fine on the Center Force clutch. The local shop has a 3/4" that I'm going to try. I also learned never put thread lock on that push rod thread. What a pain getting that out. Thanks for help.
-
I'm using a tilton master I believe it's 3/4" You would think that would help. I can't remember which is right. The smaller the dia. the harder the pressure or the opposite.
-
-
-
