Extinguisher

Ok Steve..... I think I might get the most help from you....I have a 71 240z... The clutch is limp and I have bleed it and bleed it with no results... I then removed the slave(which is new) and the line going into the slave only had a very slow drip of fluid, not sure if it supposed to do that or have a faster leak... the slave seemed fine.... then removed the master cylinder and cleaned that.... After putting the MC back on, the line to the slave squirted out fluid when I depressed the clutch... I put the slave back on..... bleed it and bleed it some more.... and the rod doesn't even move........ Also... when bleeding the slave, I noticed that the fluid did not squirt out very strong..... Any help would be appreciated, Thanks, Tim