TRtom

Figure out, 300ZX has two bleed points for clutch.

I found a braided line on ebay for like $25 so thought I would give it a try, about the same as a rubber hose. Let you know what happens, but you are right, fix the hose fix the problem

Banjo, I knew it was some musical instrument, I was thinking tuba. Anyway, may be wrong, but the clutch just feels not as tight as the other cars with braided lines, but maybe my imagination. It is leaking (just small drips) so will probably have to replace anyway. But you don't think it will make any difference??

I have a 300ZX and the stock clutch slave cylinder has a rubber hose running from the metal pipe to the slave cylinder (about 12 inches) Way too much flex in the hose and looking to replace with a braided one. It does not have a screw on both ends like my 240z, but screw on one end and the round piece on the other end with a bolt through it (forgot what it is called) See link: http://i225.photobucket.com/albums/dd149/tvtanner/brakehose.jpg Any ideas where they stock these, or someone can make a custom one. Thanks

Well I followed everyone's instruction and even added a few and got it installed and looks good. However, and there always seems to be a however, the precut one I bought (I think it was Datsun Unrestore, or something) the vinyl was preglued to the foam so I left that alone. BIG MISTAKE. Following everyone's instruction, the paint sticks were the trick in particular I put the front in and then used 3 stir sticks and stuck them in the front to hold up the vinyl while I sprayed it and the top (the sticks were facing the back of the car, one on each side and one in the middle all facing the read of the car) That was the trick. After all was said and done the foam stuck great, but the vinyl that was already stuck to the foam from the parts guy, came lose, so the foam is stuck tight to the roof (the part I did) the vinyl that was stuck by the parts guy fell off. Not sure how easy this will be to fix, but screw it for now until it lands on my lap. Future warning, be sure the vinyl is well stuck to the foam. One other item, I took a plastic drop cloth and laid it all over the inside of the car to protect everything, that worked great even though that spray product does not splash much at all.

Getting ready to do, does anyone have any new ideas since this post in 2006? Or does anyone have photos, or even better yet a video?? Thanks

I am looking for a couple of 280ZX fender emblems that are in great to new condition. I have seen a few on ebay, but they are $70, or is the going price for those things. Don't have to be brand new, but at least in very good condition.

I had a similar problem and it was the cable behind the dash was bending and not actually moving the thermostat. May not be the problem, but just another idea.

Still working on the car and haven't taken any photos yet. Will try to get some more taken and put in a gallery something in the future. May take you up on the Z-event, I also have a 82 ZX which is my daily driver. Let me know when you have some events. Tom

Yep, that was mine. I bought from a guy in Florida who was a little misleading as to the condition so I had the Z-Doc do some work. He is not the fastest guy in the world so it was there for sometime. Really does know what he is doing so it was worth the wait. Got a good deal on the car, so even though had a few issues, I can live with it. What brings you to see the Z-Doc in Roanoke?

If the girl in the picture is included I would pay $2,800 without even looking at it.

They are 16" with Khumos. Handles great. Is that your 510? Wish I would have kept mine I had when I was in HS (1973). Cool car and really fun to drive.

I bought touch up paint from these guys and it looks close. They also sell by the pint, quart and gallon http://www.automotivetouchup.com

Besides from my 72 240Z, I have an 82 280zx. This is a great car as it is still the basics of the orginal z, but has the great comfort features, T-Top, A/C, power steering, electric windows, etc. I use this everyday to drive to work and is a great daily driver. The 240Z is fun, but is not what I would want to drive to work everyday, especially with no A/C and wearing a suit to work

Marc: Congrats on getting the lift up. As we discussed, I think this is the best deal on the market. If anyone else is looking for one, I can certianly recommend it. When I bought the price on ebay was the same so didn't have that option. What I did do was ask the sales guy what else he could give me if I bought. He threw in more drip trays and another jack tray stand which is nice because I can jack up the entire car. Anyway, ask the sales guy for some freebies if you order direct.