AlanVDW

Does anybody have spring rubbers from a Z31? The cars were shipped to dealers with rubber pieces in the coil springs. These were to be removed before delivery to the customer, although many cars left the lot with the spring rubbers still in the suspension. Thanks, Alan

My pistons arrived from Nissan Comp the other day. I was told they were NLA, but some stock was found. Now I can rebuild both sets of calipers. I did aquire a spare set of Sumitomos from a racer in Texas who has moved on th Hondas. I found him thru an ad I placed on an SCCA production car forum. I have a set of vented rotor calipers on one car, and solid rotor calipers on the other. I'll have to investigate my rotor options, maybe switching one car to the solid rotor version. The solid disc part # may be written down, um, somewhere, in my car's notebooks.

Got an email from Courtesy Nissan stating the pistons are no longer available. Seal kits from Nissan Comp arrived today!

Datsun Spirit is out of stock on the kits and they'll let me know if they come in. I did place an order for the pistons from Courtesy Nissan in TX and got an order confirmation. Thanks.

I called NISMO in Tennessee and placed an order for the caliper kits (seals, dust boots) on 3/3/8. Jessica said I may see them in 6-8 weeks. Pistons and bleeder screw were not available. I check out the AP site. Thanks, Alan

OOPS. Correct part # for the pistons is 41128-68200. Here's a pic of the caliper. www.needmoreracing.com/ForSale/mk63FIAcaliper.jpg

Anybody have a source for parts for Sumitomo MK63 four piston calipers? I have two each on the front of my Datsun 510's and they are in need of rebuilding. I may have found rebuild kits, but I need 41.3 mm pistons and bleeder screws. Piston part # 41124-68200. Bleeder # 41129-A1280. These calipers are a bolt on upgrade for early Z's and were used on the Z and 510rally cars. They will fit inside the smaller 13 inch wheels. Wilwoods are too large. Thanks, Alan. alvspriteREMOVETHIS@aol.com