.jpg.7525e3504a8c7b90f3a92f6dd6dc5c08.jpg)
fixitman
-
Posts
418 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Knowledge Base
Zcar Wiki
Forums
Gallery
Events
Downloads
Store
Blogs
Collections
Classifieds
Everything posted by fixitman
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Very nice, creative design. Was it custom made? Where was it sourced? I would be interested to see a photo of the air filter arrangement. Regards, Fixitman
-
Perhaps these photos will provide a few ideas for a heat shield as well as a balance tube. Note that the original fuel rail brackets have been used for fuel supply, fuel return, vacuum and fuel vapor purge. Regards, Fixitman
-
Perhaps these photos will provide a few ideas for a heat shield and balance tube. Note that the original fuel rail brackets have been used for fuel supply, fuel return, vacuum and fuel vapor purge. Regards, Fixitman
-
Since my project is pretty far along, I feel a little less stress now. But I'm using Stage 1 European springs. Any problem in combination with these sway bars? Thanks for the reply. Fixitman
-
Would anyone be able to provide the casing dimensions for a factory muffler for an early '74 260Z? Thanks, Fixitman
-
I have an early '74 260Z with a new factory 280Z 5-speed (new in 1983 anyway). I believe the clutch parts are for a 280Z 5-speed also. At this point, the Nissan part numbers probably all superceed to an early 280Z or later Z series. Check with the dealer. Good luck. Fixitman
-
I am rethinking the size of the bars on my early '74 260Z. It currently has 1 1/8" dia. front and 7/8" dia. rear bars. These were the sizes offered by Quickor in the early '80's for this model and year. I believe Suspension Techniques offers the same size bars today. Are these too large for a street car? Thanks, Fixitman
.thumb.jpg.75165ae25cbc256d967cf4697fa089e3.jpg)
