Jump to content

Garagegoon

Free Member
  • Joined

  • Last visited

Everything posted by Garagegoon

  1. I have purchased two dash mats from vendors on ebay and neither fit worth a dang! My dash like any other that has been exposed to the sun and is cracked, but i dont want to put a dash cap on it nor do i want to replace the whole thing just yet. I just need a good fitting dash mat to hide the eyesore fro the time being.
  2. Garagegoon posted a post in a topic in Engine & Drivetrain
    Thank you.... It was the lazy way out asking a simple question like that but it keeps me from goin home then to the hardware store. I could have asked my wife to use my thread checkers to see what it was but that would have taken alot more time and explanation.... :stupid: Thanks again!
  3. Garagegoon posted a post in a topic in Engine & Drivetrain
    Catchy... don't you think? Im at work and need to know what size screw holds the spark plug wire retainers onto the valve cover. Thank you!
  4. http://wichita.craigslist.org/cto/1060742558.html And dont make fun of my plug wires goin over my oil fill cap... That was a temp fix until the correct clips came in.... Which I now have and will fix post haste.... And it now has correct steering wheel in it....
  5. I have no clue as to where this Z is at. Not much worth saving here.
  6. Bonzi Lon, Location is just my garage for the time being. Within the next year I hope to locate a building to start selling parts and cars from. When projects such as the Z on craigslist comes up, I want to purchase these and make good rolling chassis out of them to sell. I have a good friend that went to Wyo Tech for body work and another ( his brother) that went there for interior. Myself... I do drivetrain. It's more of a dream right now and not so much reality as I would like it to be. But, that's where all good things start. If I dont purchase the Z myself... I will take good pictures and post them on here.
  7. Check this out near Wichita KS... It will need work as well.... I have not gotten a look at it myself but plan to this weekend. http://wichita.craigslist.org/cto/1035824077.html
  8. Hey

    Garagegoon posted a post in a topic in Introductions
    In late 1962 the Datsun Fairlady (SP 310) was introduced to the world market, named for the famous musical film of the same name. It arrived in Australia mid-1963. There had been some earlier model roadsters manufactured by Nissan, but the all-new model was the first serious attempt to export and compete with the predominantly British sports car market. The new roadster was powered by a 4-cylinder ohv 1488 cc engine. The original single-carby was soon replaced by twin side-draught Hitachi (SU licensed) carburettors, the engine developing 85bhp at 5600 rpm. The gearbox was four speed, and front suspension was independent with coil springs and A arms. Originally this car had the unusual feature of a third seat mounted crossways behind the two front seats. Although not a startling performer, managing a standing quarter mile in 20.2 seconds, it was not bad compared to other sports cars of the same era, and economical achieving nearly 29 mpg when tested. It was praised for the quality of finish and extras such as a radio included as standard. 1965 saw the introduction of the 1600 sports (SP311). The name Fairlady was dropped in the USA and Australia at dealer request, a more macho image being required, although some overlap models saw Fairlady badges still being used rather than the 1600 motif which replaced them. The name Fairlady continued right through all models to 1970 in Japan. The 1500’s front drum brakes were replaced by discs, a new grill was added along with other detail changes to interior and body, and the increase to 1595cc was achieved by increasing the bore. Power was raised to 96bhp dropping the standing quarter mile to 19.5 sec. With this model Datsun Sports Roadsters modified for racing began to make an impression on the competition scene, and a 5-main-bearing power plant replaced the original 3-bearing unit. The year 1967 saw a giant leap forward with the introduction of the SR311, or 2000 sports. The cheaper 1600 version remained in production. The new model had a 1982 cc engine delivering power through a new five-speed gearbox. The engine was basically the same as the 1600 with the stroke increased and the cam moved to the overhead position. There were more detail changes to body and trim, and the chassis was strengthened, but the brakes remained unchanged. The twin-Hitachi carb engine produced 135bhp at 6000 rpm, but an alternative double choke twin Solex side-draught version with high lift cam produced a remarkable 150bhp. (Compare this with the 95bhp of the MGB of the same era) Australia only received from Japan the 150bhp version. A standing quarter mile time of 16.1 was achieved with a top speed of 124 mph. In Australian racing, the new 2000 sports in the hands of drivers like Doug Whitford of the works Datsun Racing Team cleaned up the competition, and in the US drivers such as Pete Brock and Bob Sharp did likewise. Production continued until 1970 when the huge success of the Datsun 240Z ended the roadster’s run, the factory space being required for the new model. In all, approximately 50,000 Datsun Sports Roadsters were manufactured, mostly sold in the USA.
  9. Take one an pass them around! Once again... Congrats on the new memeber to your family!
  10. How helpful is that comment? Im sure he already knew that much. It might be possible that a new idea has surfaced and he is just throwing out a question to see if that idea lands on here.
  11. Is this it? JK..... Im sure yours is still in one piece!
  12. My post isn't going to help as I have not seen the car. But, I would like to compliment on how nice and well done it is. Good luck on your hunt for the Z.
  13. Well, if it ever comes up again and enough people want to do it then I'm in. I'm person #2 if Z Good 1 is person #1.
  14. Garagegoon posted a post in a topic in Open Discussions
    f) paint the caps on the brake master cylinder black to match the cap on the clutch master ???????????????????????????? If you do that any brake fluid that might get on it will just eat the paint off, then it will be worse than it started. Just get the black plastic caps..... cheap and easy and they will stay black.
  15. Garagegoon posted a post in a topic in Body & Paint
    Single stage is a base clear mixture. It will appear diffirent unless you put a clear over it. Just having base will have a semigloss or smooth satin finnish. Good luck.
  16. Garagegoon posted a post in a topic in Open Discussions
    The installation items included a wooden knife, moulding, cut knife, bond(contact cement), cleaner and something that has me confused called "past (aron alfer)". Any idea what that is? Maybe you ment to say aron alpha? Take a look at this site... It's an adhesive. http://www.aronalpha.com/
  17. If you have a day or two to wait i will take one apart. I have several seats laying around that are missmatches etc... I will sacrifice one and let you know the measurement.
  18. He just wanted helpful information... and all ya'll are doin is puffin your chests and seein who's got a bigger set... The only helpful info so far was from Zak's Z... I agree... Throw some pictures on here and you will get a ton of help im sure. Good luck and congrats on getin your first car back...
  19. My wife and I have been talking about making a week trip to Colorado... This would be a perfect time to do so... See you all there!
  20. Garagegoon posted a post in a topic in Engine & Drivetrain
    I wish it were very rare... Im going through that problem right now. Head gasket leaking at back on drivers side, drooling down block. Im goin to wait for the cold snap to be over then get out there and break it down to replace it.
  21. Now i have to get creative..... New car... 1941 Chevrolet... Also has inline six...Sitting next to the 240 it looks like a beached whale... makes the 240 look like a midget car.
  22. Nice cars and hooters girls..... 16 years old standing next to them... I would have to hold a shirt up as well to hide my excitement....:embarrass:
  23. Garagegoon posted a post in a topic in HISTORY
    i live in wichita ks... I know of one here that does shirts for companies like Big Dog Motorcycles and our local Harley dealership as well as other people. if someone were to come up with a kick arse design I could get er done... untitled.bmp

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.