Zedrally

I fear that the designers have taken their revenge my good sir, [says he as they help him into a straightjacket] hhhhhhh.

Anyone with interior shots of both?

Ahhh, thats one we RHD's have over you. Very few where broken due to catching as the handbrake protected the driver from this. What have you used after it was broken?

Alan, in any of you literature is there an exploded view of the body shell? I'm starting to form an opinion that it all based on the trans tunnel after all. Mike

Oh yes, None hardened seats are made of brass. Yellowish in colour. Hardened seats are steel, steel in colour!

When one thinks about it, this thread started with the handbrake position, however in reality, it begs the question about the entire centre console. Was the handbrake left on the right for left hookers because Nissan would have to produce a different console? Whislt its a minor point it really effects the outcome as we have seen. Ergonomicly the choke is in the correct position for a RHD vehicle, but how does it feel in a LHD?

Oh Mike, you stirrer, have you been taking lessons from Alan T? ROFL

I must admit each time I drive past one, I shake my head and wonder why????? Alpha, you're quite right about the lemon and am now sorry I mentioned that they where Aussie made. {duck for cover}. Anyone remeber the P76? MN

Wow, lots to talk about here. I was luckily a proud owner of a V6 3000 Capri, traded in on a 260Z. Now which was better? The Capri lacked top end power and had typical british creature comforts[read none] whilst the 260, well after the Capri was complete luxury. It came standard with a heater & RADIO This incidently was why Japanese Cars made big inroads in Austarlia in the 70's. I almost certain that the 3L V6 was fully imported as very few were actually in the country, the other varients where assembled here as where many other manufactures cars in that time period. Ah, in those days of tariffs, we had VW, Datsun, Morris, and others that I faintly remember either manufacturing or assembling their respective vehicles. But I digress...... Yes, the 90's Capri that showed up in the US was made in Australia. It was howled down by the press at the time as it was meant to be a Sports Car, how could Ford be serious, a FWD Sports? Alpha, tariff barriers increased the price of all sports cars in Australia around that time, but what really killed the UK/Euro imports was that they just couldn't cut in in terms of comfort/price/reliability/and being a chick magnet comleted the equation. It brings tears to my eyes just thinking and writing about it now! I would venture to guess if it wasn't for the tariff barrier then the number of zeds sold in the Aust market would have quadrupled to say the least. Victor to say the Euro market was smaller is probably not quite correct. They like Australia, particularly the UK had extremely high tarif protection measures in place to once again protect there local industry. This is why very few zeds made there way into the UK. Australia was a small market, NZ & Africa where smaller. Just out of interest where any zeds imported/exported into SA? Just to finish, I'd like to clarify that I'm not trying to take the "wizz"out of any other car, manufacturer etc, just a little history lesson, like this thread has become. In fact it's has become the most replied thread, so I would guess there is much interest in not only Zed history but also early 70's sports manufactures. Keep it up guys, we're all learning and filling in those "missing"bits. Mike

Hi Rui, No need to appogise as we have just recently been discussing 240K's as well. 180B's like 510's where part of the Australian Rally scene for many years. In fact one of our elderstatesman in Historic Ralling still "flogs"the forest in his 180B, and get this, it's automatic! Has managed to finish as Category Winner for the past 2 years as well. Need more info about your find, is it 2 door/4door, check under the bonnet to see if it has SU's, if so then it's a SSS. May be some other Aussies can jump in and help with the visual bits, I can't remember without having them side by side, In fact, I wondering if they did come 2 door? :classic:

I guess what I was really trying to say is. was the choke position a factor in not changing the handbrake. Apart from mirror imaging the console the choke [on later model cars] would need to have been changed. In my way of thinking if it wasn't then you would have the choke hard against the handbrake, certainly not ergonomic. Could this be thrue reason for the setup on the zed?

This is what happens when you don't apply the KISS principal.[i had a feeling a simple reply would provoke a huge response from within the ether]! These subtle differences really are of no consequence in the big scheme of things, however, they do tend to make each zed interestingly different. Any takers for the choke position?

Ignition on the RH side and combination is the same. Over to the BBC Home Service........

Back in 77 when I brought my first zed, iit came with the lot. Flat tops [because they couldn't sell them elsewhere], air pump, injectors into exhaust manifold, coasting valves and anything else you could imagine that had no relevance to Australia. Nuff said.

Oh my God, we haven't even mentioned the choke!!

huhh, well that just blows the cost theory out of the water........

sssssss that pretty cheap. I wonder how good it REALLY is?

Can someone please answer the question on the bonnet/hood realease? Please

I couldn't let this pass by. Several Years ago I got the dash recovered. Being curious I had a good look at it and realised how the "bits"could be swapped over from RH to LH, so there really isn't a LH dash or RH dash, just a dashe made of generic parts that could make either!

Not sure on any of these points alpha, maybe there is no black or white answer as all we are doing is discussing a grey area. Can anyone tell me where the bonnet release is on a LHD aed car? If it's on the RH side then it's a question of money else....... tea & crumpets at 5 no doubt...

Has anyone flipped the car over to see what mountings actually exist in the trans tunnel. I would have thought it would have only been a minor change for the mounting hardware going right to left. I'm doing this from memory as the good book are at home, but don't the cables meet and come the centre of the trans tunnel. Is there provison for a mount on the LH side? I await a call from the BBC...........over[but not out]

Another thread bites the dust!!!!! LOL

Ahhhhhhhh, all these years I've thought matching numbers where chassis/engine numbers. not matching numbers from the plate eeeeeeee, can't wait to get home and check both cars..... [see you can learn something new]

My try, thanks again Mike! :love: :love: :love: :love: :love: