-
1975 280z wont start
I went to start my car and it backfired slighly and now it just turns over and doesnt start at all. I pulled a plug out and im getting spark, and the plug had a little gas on it so im sure im getting fuel. I pulled the valve cover off and the timing chain is on and looks fine, cam is spinning. Is there a sensor or possibly pcv valve (i CANT FIND THE PCV VALVE to replace it, I bought one a year ago)giving me a problem?My car just turns over and doesnt fire at all.Any ideas pease reply,thanx
-
1975 280z wont start
I went to start my car and it backfired slightly, now it just turns over and wont start. I pulled a spark plug out and Im getting spark and fuel. I took off the valve cover and my timing chain is on and looks fine. Is there a sensor preventing my car to start? Any ideas please reply,thanx
-
Fuel pump help !!!!
I went to start my car and it backfired slightly and now it just turns over and wont start. I pulled out a plug, im getting spark and fuel. I took off the valve cover and the timing chain is fine. Is there a sensor or something preventing my car to fire up? Anyone have any ideas, please reply. thanx
-
hood tention rods
I had my hood off a couple months for repairs and forgot how the tention rods go on the hinges. Can anyone give a good explanation or show some pictures. Id really appreciate it!
-
My 1975 280Z wont start ,please help
Thanks
-
My 1975 280Z wont start ,please help
Thanks for your advice, Ill check that, and switch out fuel pump.
-
My 1975 280Z wont start ,please help
I just got my 1975 280Z out of storage. It was sitting 10 years with 3/4 tank of gas. I put some fuel conditioner in and some octane boost. It started right up and I drove about 15 miles home. The next week I changed fuel injection hoses, water pump, heater hoses, drained gas tank and flushed premium thru gas lines, spark plugs, rotor and cap, plug wires, and fuel filter and now it wont start. I dumped gas down each cylinder and it fired up until that gas burned out. I swapped out the fuel injectors with another set(from an old spare motor) so I dont think its the injectors. Why isnt gas going thru the injectors? Or are all my injectors bad. The ones from the spare motor looked worse but I just wanted to see if that was the problem. I checked to see if I was getting power to the injectors and I am. Why wont my Z start, please help.
Matt Reszel
Free Member
-
Joined
-
Last visited