Carl Jr

I had some of the same issues with mine a while back. I had replaced cap rotor points wires and plugs. No start. I know I had them in the right order cause I did them all one at a time. Tried several times to get started nothing. Took plugs out and they were black and wet. Cleaned them up with wire wheel put them back in still would not start. Put old plugs back in car. Started right up. Weird I know but they have been in the car since. Another thing that I found was that I was not getting enough fuel so I replaced the pump and that helped with starting too. I took the lids off my SU's and found I was not getting enough fuel to the rear carb and that was causing it not to start too. Start with the plugs I used NGK's since that is what I have grown up with and the Z's like them then. If it still does not start get on the carbs they too may need adjustment. If you do not know how to adjust them ask before you try. There are a lot of people on this list I know can help you with this. I will not try since I still need mine done a little more. Hope this helps a little