Chets-z

Thanx for all the help! Replaced the master cylinder this morning, did a bleed job and Wallah, great brakes again! had to go through 2 master cyl., got a rebuild first, was a corroded inside and wouldn't bench bleed the front cylinder. Went and ordered a new one and it bled properly and works like a new one should!

Ok I'll try the Master cylinder and yeah, I bled 'em the right way, furthest first! Brakes are like women, a lot of hassle, but you sure need them!

I bled them a couple of times, have a self bleeder. Odd though that they work and then don't work and then work again after you pump 'em up a couple of times! Strange!

I went through my brakes, put on new rotors and pads, new back brakes, wheel clylinders, stainless braided lines, cleaned out the old nasty fluid from all the lines and put in DOT 5 fluid. what happens now is that the brakes will function great, good pedal for a indeterminate amount of times and then they will go to the floor and the brake warning light comes on! Sometimes it will be one good pedal and maybe the next time it will be 6 times and they always pump up fine. I'm stumped!