datsunnyit

rear deck NISSAN emblem SOLD

Hello is plastic genuine Nissan. no flat. Is slightly bent if is the correct description Sent from my vKB076F using Classic Zcar Club mobile

Yes is available

You have a best offer over 350 US dollars included shipping . PayPal fee not included

HI all I hope this i right place for this ad. I have the rear NISSAN emblem for Hatch for sale. Is for Fairlady Z Japan market. Some people pay over 300 US DOLLARS for a copy not 100% identical at original genuine OEM part. My part is gegenuine OEM Nissan Datsun. If interest let me know your offer paypal fee and shipping not included or let me know where is possibile put an classified.

please you can you give me the weight and dimensions of packet ? approx ..

please give me some big picture from all sides from all 2 radiators and inside with removed cap. You have a price for shipp in USA state washington near St Ellen ?

Shipping cost to Italy? Low cost option at post office. Please Sent from my LG-D620 using Classic Zcar Club mobile

Please can you give me various big pictures of radiators ( the radiator numver 2 is in best conditions?) how many holes leakage points have radiators? Sent from my LG-D620 using Classic Zcar Club mobile

Radiator available? Sent from my LG-D620 using Classic Zcar Club mobile

Hi all the standard 240Z fan clutch for radiator fails. Is necessary replace with new modern fan or 2 fans with thermostat. Any experience, suggestions link for vendors. The electromechanical thermostat or the electronic sensor (NTC), at what temperature has to be calibrated? If a fan is used as recommended diameter? If two fans who recommended diameter? you have pictures? other important info ? thanks

Hi all , where is available the gear parts for change the gear broken under the motor of rally clock? Anyone use 3d printer? And for clone the 2 rally knob? Thanks regards

thanks for picture and info. this is cylinder for 240z ? thanks

Hi all, clutch problem. Who is wrong ? PICTURE 1 the clutch fork is free put the rubber and is perfect PICTURE 2 fit the slave cylinder after some miles / km the rubber is moved out of your place. PICTURE 3 I removed the rubber from your place and in a free position this is the condition of the parts aftermarket RUBBER aftermarket 3/4" SLAVE CYLINDER is much long ? missing only selent between gearbox and rubber ? other ? The clutch pedal when depressed is always hard ? the first inch (2 - 3 cm) is light hard , after is hard to depress. the lenght between chassis under pedal and the top of clutch pedal ( rubber pedal ) is OK. ( about 23cm NISSAN SERVICE MANUAL ) Please can you help me ? Thanks Regards

https://www.youtube.com/watch?v=pOd9WsNmz2Q hi please watch the video and let me know your opinion and how center dismantle and reassembly the JET ( if is correct name ) the parts under the carb that go down and no return in up in appropriate mode. thanks

the rear strut bar for 280ZX can be used on 240z? (I mean the bar inside the car) what is the differences ? the 3 holes for mounting suspension are equal to the 240z? the distance between the two suspension is longer, shorter, equal? for the front bar to be inserted above the engine of the 240z, I can use the scroll bar of the 280ZX? what are the differences? thanks

Hi all Is possible used the electric motor inside the door of 280zx , inside the door of 240z ? The teeth of the ( power window electric motor 280zx ) are equal to those of the rack of the window 240z ? If it is possible I prefer to leave the original crank of 240z, and put inside the door, the electric motor Does anyone know also the name and brand of after market kit, for the power window on 240z ? thanks

Hi all anyone know the causes and solution for this problem ? see pictures. thanks at all.

Thanks for question G

the link http://www.flickr.com/photos/13763559@N05/8297357057/in/photostream/ thanks

Hi all But the DATSUN 240Z has only a capacitor. The condenser is close to the voltage regulator, or near the coil and resistance, as in some brochures for the U.S. market. Or attached to the alternator, as in the later models to 240z. Can anyone confirm? thanks

Hi all, How many condenser have the 240z ? A) Condenser near the voltage regualtor black & white wire capacity of this condenser ? what is write on the body of capacit. can you measure the capacity with tester.. :-) Condenser near the ignition coil & resistor where is connected ? capacity of this condenser ? what is write on the body of capacit. can you measure the capacity with tester.. :-) c) Condenser for GENUINE NISSAN FM RADIO Where is connected ? capacity of this condenser ? what is write on the body of capacit. can you measure the capacity with tester.. :-) D) Condenser near the point distributor no problem I know this condenser. E) alternator connection is correct ? alternaor connections | Flickr - Photo Sharing! and F) battery connection at the starter is correct ? battery + - | Flickr - Photo Sharing! G) The check valve near the BRAKE MASTER CYLINDER , have 1 arrow on body. The direction is enter from B M CYLINDER , and exit in direction of engine ? is correct ? H) The starter for USA model is different for EURO model ? I) What is the difference between the distributor for USA and for EUROPE ? USA model is ok for Europe ? Thanks

Hi thanks for answer, how much the capacity , uF ( microFarad ) has the condenser ?

Hi all , I do not know where to connect some wires of the 240Z. Can you help me? http://www.flickr.com/photos/13763559@N05/ http://www.flickr.com/photos/13763559@N05/8238186955/in/photostream http://www.flickr.com/photos/13763559@N05/8239254952/in/photostream http://www.flickr.com/photos/13763559@N05/8238186635/in/photostream http://www.flickr.com/photos/13763559@N05/8238186293/in/photostream thanks Franco

Hi all , anyone know this 3 small rubber parts for 240z ? how many pieces in one 240z? where they are located? http://www.flickr.com/photos/13763559@N05/8083347192/in/photostream http://www.flickr.com/photos/13763559@N05/8083353445/in/photostream http://www.flickr.com/photos/13763559@N05/8083348278/in/photostream part N°1 part N°2 part N°3 for brake drum ? thanks