roscoscott

It happened to me at a red light. I read a few post in the Hybrid and they say the same thing. I'll try it this weekend. Thanks for the help

The push rod wouldn't adjust. (It's stuck) So I put two washers in-between the master and booster. I drove it around the 10 mile loop and they progressively got tighter and tighter until they finally locked up. I unbolted the master and the wheels freed up.

The check valve is in the master?

I'll try this today. Thanks

I tried to adjust the rod but it did the same thing...

75 Z I installed a new brake booster, 4 piston calipers on the front, disk on the back and a master cylinder off a 82 Z. problem: After putting on brakes in stop and go traffic for about 10 miles the brakes get stiffer and stiffer until they lock up. I can unbolt the master cylinder and the wheels will turn again. bolt it back on and drive again and does it again. question: What is going on man! Is the booster defective? Please help

Looks cool, did you weld the Z emblem in the fill hole?

I have! and after some tuning this thing is quick. Before I received the throttle bodies I did a break upgrade. Converted the drums to disk and put 4 piston calipers on the front. So when I got it running I was testing the new throttle bodies and breaks. Turns out I needed to upgrade the master because I had no breaks! I put a master off a 82 ZX 2+2, had to modify it a little but it works great. Damn this thing is fast!

I was going to order one of the air boxes listed above but thought I should call the guys who designed this system. I'm dealing with Rebello Racing, Dave said he had a backing plate for it and would find a filter that would work. He said not to order one of the boxes until he has a chance to run one on the dyno. I'm running a adaptronic ECU. Having the laptop in the car tweaking and tuning is cool as hell.

Thanks. It's been a slow going project.

Sweet thanks!

working on my 75 Z. I need a air box for the 6 throttle bodies. Does anyone know where I can find one?

Will do thanks:)

Has anybody used Rebelos aftermarket ECU?

Found a thread that says seal everything front to back. Thanks ~Rosco~