Everything posted by Robin260z
-
Slammed 260z from Holland
I will try the upload a lot more in the future. The deadline is around the beginning of march. Then starts the new meeting season here in holland with a lot of nice meetings like time attack and drifting.
-
Slammed 260z from Holland
Hi guys, I has been more then a year after my last post. Been very busy on the car, new work etc. I have a lot of topics i have to update on several forums and was more building the car then update topics. I guess i have forgotten this forum a bit :stupid: So there has a lot to be update so i'll start: The car is since october 2012 back from the painter. He sanded the complete car en painted the whole car QM1 white from the nissan skyline. After that i started to build the car up with al the new parts i collected and all the old parts that have been sandblasted en repainted. The engine was also cleaned and painted, but thats the only thing that has been done on the engine. Engine itself has been left in the same condition before i started this project. Runs smooth, everything has been adjusted and had i big service with all new gaskets, fluids and filters. The car was at the painter from the end of july until the end of october. Meanwhile i prepared a lot of stuff. cleaned it en repainted it. The first saturday of 2013 it has started since more then a year. And i started within 5 seconds after the carburators gained fuel. We should call that old reliability or Datsun power I had some cooling leaks which has to be repaird and i concluded my 38 year old radiator had give it up. Time for a new aluminium. I am now finishing the complete wiring which was not complete or working fine. I stripped the whole cable loom, repaired the wiring, put some new isolating tape around it and put some "snake skin "around the whole loom. That what i have done the last year in al small message. Told enough. Picture warning:bulb:
-
Rear disk brakes conversion handbrake
i have read multiple articles in which people say you have to switch the right cable to the left and the left to the right side. Maybe that'll help? succes
-
Slammed 260z from Holland
Front are 19 and back 25 millimeters. Both the front and the back tires are the size measuring 215-40-17
-
Slammed 260z from Holland
Some older pics of applying and sanding filler to the body. Some newer. These are the most common jobs i am dealing with. Hop the bring the car to the painter at the end of may Dashboard, Dashboardcabin and ventpanel in front of the window are back from the flock company. It looks perfect. thats it for now. I hope the next pics are on the painters truck.
-
Slammed 260z from Holland
Updates: All the fiberglass panels on the front are fitting correct. Finishing touch has to be made with filler I can mount my h4 headlights again. The fiberglass panels had no mounting point so i had to cut them out of the steel ones which had a lot of rust. Now it looks like it is original Bought some Volkswagen beetle fenderrubber to mount between the fender and the flares. This fills the gape between them. Enginebay is ready to be paint. The underside of the car has been sprayed completely with anti stone chip spray. ( Dont know the exact the english name ) My right side door was completely rusted so bought a new perfect one together with a perfect drivers side one.
-
Slammed 260z from Holland
well i was thinking about that the same way but i think it is hard to change the design. But i have seen one Z ( Aardvarks Z , i think a well known name in the Z scene ) that doesnt have them anymore.
-
Slammed 260z from Holland
Well the current status of the project :
-
Slammed 260z from Holland
Well some kind of speclist : Engine -2,6 litre 6 inlinw Ohc -Double Su carburaters -Twin air airfilters -Inlet sandblasted and painted -Janspeed 2x 3-2-1 uitlaexhaust manifold -Megan racing Muffler ( will become a smaller one ) -Magnecor 8mm sparkplug wires Exterior: -Zg fiberglass fender flares -Xenon polyurethane Airdam - BRE style spoiler -Fiberglass bonnet with original airvents -Fiberglass fenders at the front -Fiberglass headlightbuckets -All the chrome trims will become flat black -Bumpers will become flat black -H4 conversion with clear headlights and 6000k bi-xenon HID -Taillights changed too double taillights using the foglight -Aluminium race Fuelcap conversion Interieur: -fully stript -removed all the isolation off the floors -Qsp deepdish 90mm drift steering wheel -Omp racingseats -4 point harnesses -Dashboard will be flocked -Probably i will make a 10 point rollcage in it. Handling: -Mazda lantis ba d2 racing coilovers customised -Complete Polyurethane bushing -The complete suspension is sandblasted and coated black -R200 3:9 Wheels: -Rota rb-r/x (Front 9 J et-13 --- Back 9,5J et-19 ) Tires: Falken 452 215/40/17 stretched Brakes: -Vented /Drilled /slotted 300zx z31 non turbo rotors front -Drilled/ slotted 300zx z31 non turbo rotors back -Toyota landcruiser vented 4 pot calipers front S12W -Nissan 200sx s14 rear calipers back -Modern motorsports 240sx brackets customised to fit the larger s14 calipers
-
Slammed 260z from Holland
Rims are the rota rb-r indeed. 17x 9,5 -19 and 7,5x9 -13 @Zguy91. Do you the name of this irishman? cant find him on hybridz
- Slammed 260z from Holland
-
Slammed 260z from Holland
hi guys, I am reading a while now here on the forum so i thought is will show you guys my ride. My ride is a '75 datsun 260z 2+2. Here it is for the moment: I am now making the flares to look good with the right flush. I am nog looking to find spacers with the right thickness. After that the backfender wil be cutted. In the front there wil be fiberglass fenders installed. Car wil be prepared to spray the interior, exterior and enginebay in QM1 white or grand prix white. regards, robin
-
brake upgrade questions
hi guys i want some confirmations about upgrade my brakes. In the front i would upgrade to toyota 4x4 vented calipers with the right rotors. But is this a straight bolt on swap or do i have to use spacers? second question; i want to upgrade my rear brakes to disc. found a advert that offers 2 maxima '81 brackets and 2 '79 280zx calipers. Is this the exact combination to fit? And i gues i have to use 280zx rotors then? Is there also an upgrade for the back with vented rotors? Last question. when upgrade the brakes i have read that i have to upgrade my bmc as well. I have bought one allready and while cleaning/ renew the bmc the pistonseals broke. I found out that there are repair kits but cant find them anywhere. I have read that they are out of stock in th USA. does someone knows a solution? Thank you. regards from holland! robin260z hope
-
rota rbx 17x9,5j -19 all around
well i kinda like the drift/ stretched tyre look. but maybe the stretch will become less. First i need the wheels. i found some in stock in the USA, but then i read about the rota fast forward wheels are coming october 2011 possibly so it made me doubt about the rbx wheels. But i dont have confirmation.
-
fuel problem
well i got an update again. Today i cleaned both the fuel lines from the thank underneath the car to the front. I replaced the fuel filter, cleaned the complete fuel rail, cleaned and checked the mechanical fuel pump. ( cant find anything that was or could be broken ) cleaned the filters bruce told about and cleaned the needles and fild the carbs with oil. I did notice that the oil in the carbs have to be fild very often. the only thing i now can think of is something with the ignition or with the carbs. Ignition is strange because while idling the runs fine. While driving the car still stutters en blows ( small blasts ) out of the exhaust ( thats why i think its the ignition ) But it also blows ( small blasts ) out of the airfilters on te carbs. While driving and using the choke te cars is going to run better but still not normal. A few months before the car runned very good and fast. Things that happen between then and now is a drove the fuel tank to far empty and cooling fluid was gushing out of my radiator cap due too filthy stuff inside the cooling system. I know it is hard too give the answer when you cant see or here it, but it almost give me bad dreams about my car. Would it be usefull when i make a video? thanks so far for the help guys
-
fuel problem
Well bruce thank you for that. i didnt clean them. i ve just did it and the car is doing better but there is still the problem. ive also rebuild and cleaned the mechanical fuel pump. got a new fuel filter and cleaned the fuel rail. I havent clean the lines under the car to the tank. maybe here is also some sludge in. how can i check if it is not the ignition that has changed? I guess i could s ee this during idling? Idling is ok.
-
fuel problem
Well there was one fuelline frome the floaterpart to the carb which was leakibg. i have replaced it some i have too check it.again while dricing iff it helsp when i use the choke. What will be a commen problem with mechanical fuelpump iff it is a problem with the.pump?
-
fuel problem
Well guys thank you for your answers. I got an update. I dont have a electeic fuel pump. from the tank there are two hoses that go straigjt to hardlines.under the.car.to the feont. Fuel filter is replaced with a new one and the carbs are clean. when i pull the fuel line off while running the fuel blows out off the line. so the fuelpump is working ok. What i can think off now is that the ignition isnt working right. I had a leak at the cap of the radiator and i think water has came in the ignition. Tomorrow i am going to open up the ignition and clean it. i think the carbs are stuttering because the spark isnt ok the sounds off the exhaust are regular bangs so that can be evidence off a not right sparking ignition.
-
rota rbx 17x9,5j -19 all around
well i have decided to buy 9,5j -19 for the back. put 225/40 or 215/40 on it. the cut the inner and outer fender and use the flares. I am going to use d2 racing coilovers from mazda In the front there will be 9J -13 with 215/40. The fenders will also be cut out. In the front there will become a camber of 1 or 1,5. I was arguing about the 9j width for the front but i have found out that the rota rbx was specially made for the 240/260z. So i guess it will be fine then whith the width
-
fuel problem
Hi guys, i am having a problem with the fuel part of my car. I few weeks ago i have driven my gastank too empty and i guess there has become sludge in my fuel lines, fuelpumps and fuelfilter and carbs. I have already cleaned the carbs, en the fuel lines from the filter to both the carbs. What i have experienced is that when i try to start the car it will start with a small amount of choke. ( thats normal when starting the car when cold ) when i am going to drive and put in the gaspedal the car will stutter and bangs out both the carbs ( the first carb more ) and out of the exhaust back. this continues all the way untill i loose the pedal and put it half way. the it drives almost smooth. when i pull the choke to 2/3 open the car drives fine when i hit the gas. when i loose the gas i drowns ( didnt know the exact word ) in gas. when i pull the choke more than 2/3 it also drowns but that is normal because it is running too rich then. I have already read some topics here and studied several manuals and i think it has to be sludge in all the fuel lines. What it think i have to do is: - remove the gastank and drain it. - remove all the fuel lines from tank to filter - remove all the fuel lines from carbs back to tank - Replace all the fuel lines ( when working on it is seems better to me to replace them all) - clean/ replace the fuel filter - clean the carbs again. But what i am thinking of now, and what i have read about is that there are 2 gaspumps. An electrical and a mechanical. could this also be full with sludge? And could it also be possible that one of it fails. I read something that the electrical runs during the start and when driving and the mechanical only while driving. Maybe the mechanical is failing so that the car gets not enough fuel. But where can i find these pumps? Please can someone help me and try to eliminate some of my guesses or give me an idea where to look or what i could be? thank you robin
-
rota rbx 17x9,5j -19 all around
thx foor the answers. The tires a gonna be stretched. It is not 100% sure that i will become 215's. but i really know that there gonnan be stretched a lot. So -19 9,5 will give me problems with my valancen while turning. Does 9j with -13 fit better than?
-
rota rbx 17x9,5j -19 all around
hi guys i have a question. I want to order some wheels for my car and decided to buy the rbx. I was thinking about 9,5j back -19 and 9j -13 front. I have zg flares and there comes a airdam on it. I ill lower the car in the future with custom coilovers. The tires will become 215/40/17. Pulled to fit. Is it possible to fit the -19 9,5 at the front to? So that you get the same all around? Or will this give problems with steering etc.? thank you
-
240z valence on 260z with airdam
thank you for your reply. It is a 75 but not with the big bumpers on it. It had the same bumpers as the 240z and the early 260z. the original turn signals were mounted on or under that chrome bumper. So if i order a 240z airdam from thezstore.com without ducts but with the gape for the 240z turn signal i have to do a small fitment change. Like making brackets. iff thats all there wont be an problem.
-
240z valence on 260z with airdam
hi guys, I am havind a bit of an issue here. I have a 1975 260z with turn signals on the bumper. but i want an airdam with the 240z turn signals in it. I understand that when i buy a 240z airdam it wont fit my 260z front. Is this due too the difference in valences?do i need 240z valences with room for the turn signals then? Or cut a hole in my 260z ones make the 240z airdam fit my 260z valences? So what do i have to do to instal a 240z airdam with 240z turn signals on my 260z. thank you
-
240k GT header fit 75' 260z?
hi guys, i am able to buy a used 240k gt header. In the advert the guy says it fits: datsun c210 240k GT datsun c130/c230 200L/ 240L datsun c110 240k GT datsun 240z/ datsun 260z My Zed is a 1975 260z 2+2 will this header also fit my car. the price is around 80 dollar. Here is the advert at a Dutch marketplace site: http://auto-onderdelen.marktplaats.nl/oldtimer-onderdelen/447426080-datsun-240k-gt-datsun-200l-datsun-240z-spaghetti-uitlaat.html?return=eJwtjEEOgjAQRe9CQpeUgrgoaQwuPYHbhlZpKO2EGaLReHeH6Oq%2FN3%2FyrVb6HXTdo1bHThfo7TpO%2FUQEWso5g0%2FVYteZIFpLWKUofy8VTHB6RqOEQ0O5bAdVtmcXGDgjcb4CMOLN4b%2BF%2FVozLFwMaVv8GkbW%2BcHqeH5LbBn3kUaEO48DbKYWkJHG7LzpmoO6Xor%2B8wVtITo4&fta=eNo1kM1uwyAQhN%2BFQ84GbH4W%2BQVy6Lm3aA04RXViFHASNcq7F3B7%2B3ZWM6sdBAmvBArIdltOd1wSMWXUQJ7LSA8ujXkFalwAs2T4CdGk2aWixAyduUS4bhd%2FC9Z8P8BhTtvVrCkAO4Rzsce4jd0hrinb1flxYD39PNYDPZCIZ09MKFEJOJDg2mXGyopP2iLv6ZOimtU0VNCKMz406D3jBdCjnauifMfmpjhdjA24mGUFi511DfTkVAPB%2BFxh4oNrK8SuJePEPOt2ELLlaNlrUUExtR9VlOpml5bTpsiBqpYsmdtzJB12u%2BzdpHdA0XKEZsjro7T8nNeILp0Wfz3nr%2F8uSvUXfJ5qPaURB0zUWoDgg5iPP7wTg9DB6%2F3%2BBestigk%3D&fta_ind=14&fs=1 thank you for the help