Patcon

Question: When I turn the ignition to off the brake light in the gauges comes on. If I unplug the brake failure switch lead it goes out. Why?

Or maybe this? https://www.240zrubberparts.com/product-page/240z-u-bolt-steering-rack-rubber-bumper

Who did this chrome work for you? and what are the two flat pieces with the lip?

Very nice! Twins!!

Snapchat-1653938150.mp4 Snapchat-1782700663.mp4

Yes, that might be helpful!

I have a number of loose wires in the dash. Heater fan doesn't work. Headlights don't work. Wiper motor works intermittently, mainly on high. I fixed the brake lights today... Alternator isn't working. I tried a different regulator today. It didn't appear to help. We had some smoke out of the dash today and my help said the Ammeter was way over to the right...

We started the car today!! Didn't require Ether and it's being fed off a temp fuel source but it runs!! Lots of electrical issues still. I figured out where the 2 of the 4 wires at the coil go. I have 2 left. I'm not sure what to do with them. I believe the Green one feeds the Tach which is currently INOP. I could use help with that so I don't damage anything

Yeah, I have that part wired. It's the factory harness wires to the coil I am unsure of

Got the hood on today The paint chips incredibly easy. Way too easy it seems. It will probably have to be reworked at some point. We'll see I reworked the black wire on this voltage regulator My middle daughter was here with her boyfriend and they're good shop help! We got all the cooling system hooked up. Fuel lines on the carbs. They bled all the brakes and we primed the fuel pump. Once I get the 280zx matchbox hooked up, it might start. I have lots of electrical problems.. Can someone give me a short course on how these should go to the coil for a 280zx matchbox setup??

Are they for front or rear bumpers? I was thinking they were for front bumpers but the Carpartmanual link shows the rear bumper. I thought the only thing I needed for the rear bumper were the little rubber sleeves to keep it off the paint??

Did all 240z use these? https://zcardepot.com/products/bumper-end-rubber-right-rear-oem-240z?_pos=13&_sid=f19189e2b&_ss=r#

Im using Prestone DOT 3 synthetic

Welcome back @Mike Can madkaw's user name be revived??

Do you have to string small parts before shipping?

Contact therapy and see if they will sell you one

Rich, So I have a question. SavOn plating basically charges a barrel charge for each lot. So that means you really want ALL the hardware to go to the plater at one time. Carb parts, nuts, bolts, screws from the fuel pump, horns, etc. Is that what you do or is there another method?

They show up on the parts diagrams. I have never seen a car with them on it. I'm unsure if the ever really existed, at least in North America

It's yours!!

I believe the idea of bending the bar (#1) originated from Ztherapy IINM

I have friends and tools local in TN. So if I can get there I should be good. 😉

I am installing their interior kit instead of vinyl and if I recover the seats I will use their kit. I'm not too concerned about wearing through the color. Pretty much all of my cars have leather and I've never worn a seat out. And I love the smell of real leather!

It is my understanding that the bar #1 that is connected to the bottom of the jet need to be bent to make the needles not stick. Although I am not totally certain which way to bend it to prevent binding when the choke is applied

I would use leather. Like these https://interior-innovations.com/product/datsun-240z260z280z-genuine-leather-seat-covers/

This engine is a temporary thing. If I have time I will build an engine before Zconn 2025. If not this just needs to run well enough to get me there. There will be a long punch list after the car is running. The engine being one and the missing paint in the engine bay being the other one