Blue_streak

Im gonna have to back to the hardware store tommorow and hunt down a BSPT plug. Failing that i guess ill just do the connect heater inlet house to heater outlet hose and hope it works Sent from my iPhone using Tapatalk

http://m.homedepot.com/p/Watts-1-2-in-Lead-Free-Brass-Square-Head-Plug-LF-A823/202254950/ This is the pipe plug i picked up, for sone reason looks like no link but its there. Sent from my iPhone using Tapatalk

The next challenge is figuring the water pump inlet. It has the barb that goes to it the. A smaller one comes off it and snakes its way to the intake manifold before finally ending up at the thermostat. Sent from my iPhone using Tapatalk

Threads right in to the spot. Found this after some googling. http://forums.hybridz.org/topic/113647-deleted-heater-core-how-to-plug-cooling-system/ Sent from my iPhone using Tapatalk

Im blocking it because my heater core is leaky, my valve is leaky, my transfer between engine bay and behind dash is leaky and i just do not feel like dealing with it when there are more important things to do to get it on the road. I went to homedepot this morning and bought 2 1/2 pipe plugs ill plug up the two areas in the pic and hopefully it eill work. Sent from my iPhone using Tapatalk

What size plugs do i use to plug the cylinder head outlet to heater core and heater core to water pump inlet? Im bypassing my heater core and cant seem to find the sizes in any thread. Sent from my iPhone using Tapatalk

This the maxima bracket which can be used with the early 280zx caliper I believe Sent from my iPhone using Tapatalk

Looking for a bit of help, I'm getting rear disk conversion brackets made based on this diagram I found online. My main question is does any one know how far it needs to be machined down? The bracket has been cut from 1/2 inch steel. Thanks Sent from my iPhone using Tapatalk

Would this msd module work for this application? http://www.msdignition.com/Products/Ignitions/Circle_Track/Road_Racing/83647_-_HEAT_HEI_Module.aspx Sent from my iPhone using Tapatalk

Sweet! That helps a lot actually thank you! Sent from my iPhone using Tapatalk

That would be amazing thanks! Sent from my iPhone using Tapatalk

Ok so this mod is not deleting the ballast resistor under the coil and it is using the wires that are currently attached to the stock module Sent from my iPhone using Tapatalk

Mine is acting up when warm as well. I was gonna keep my stock dizzy and just swap in the module. I'm using a MSD Blaster 2 coil. Sent from my iPhone using Tapatalk

My stock module is not working 100%, also dizzy has 3 wires coming off it. Red, green, brown Sent from my iPhone using Tapatalk

Ok I guess I'll give it a shot, I'll report back. Sent from my iPhone using Tapatalk