IM4A2Z

Great job, Congrats!

SOLD

I had sent 2 emails and never got a reply. You also stated that you sent the deposit last Tuesday, it's now been 8 days and I still have nothing. Given the circumstances what conclusion would you have come too? The car is still yours, please follow up with the post office and send me an email.

Car still for sale! Previous buyer never followed through.

Project unfinished! in D/FW Texas for Sale 1971 240Z with full IMSA body kit. R200 Rear End with rebuilt half shafts and drive shaft 5 Speed Trans from Maxima with Centerforce II clutch assy. Engine complete but, head removed and rebuilt. Has A/C that worked when project started. Interior in good shape, dash has dash cap., seats have covers on them, weather stripping has been replaced, door panels in good shape. Front suspension rebuilt with Control components and addition of adjustable camber bushings. No Hood This car has always been garaged! Make Me A REASONABLE Offer. http://www.classiczcars.com/photopost/showgallery.php?thumb=1&stype=2&si=IM4A2Z&cat=500&sort=1

SOLD Yes, This one (77 280z) is SOLD

I do not currently have any digital pic's of the 240 I can post. I only have Photographs and no scanner to digitize them. BTW the 240 is for sale as well!

t t t

Here's a few more good links while your at it! :classic: Head Modifications and Modifications for more horsepower

SOLD Not running because it has 170,000 miles and is worn out. Nothing broken, it just leaks and burns oil. Automatic Transmission works fine. Missing intake and fuel injection system(wireing harness with all connectors intact). Everything else is there including A/C which worked before it was parked. Tires are in good condition. A few light rust spots on bottom of door and on Qtr panels. Floor panel are in great shape. Clear coat is coming off of Dark Gray paint. Hood is bent at nose and right rear has a dent between wheel arch and bumper. Interior carpets in great shape. Seats bottoms are cracked real bad would need recovering, but backs are in good shape. Dash cracked down middle has dash cap on it in good shape. All glass in good shape. Rear Hatch is in great shape, no rust. Drivers side window crank missing, but the window will role up and down. Console in good condition. $300 and it's yours. let me know if you want to take a look at it. ------------------------------------------------------------- I also have a 71 240z with an IMSA body package on it in partial completion. I was planning on taking the motor out of the 280 and rebuild it to put in the 240. $1800 Thanks David

Photo's can now be viewed at My Photo Gallery. Click here to see pic's

SOLD For sale 77 280Z not currently running. I want to get it out of the garage. E-mail or PM if interested. I'm just outside of Dallas TX MORE PIC's ADDED to My Gallery 1/7/2003

Check this thread out Mikuni's are better! CLick here

I have a set of 44mm Triple's with Manafold, Linkage, and all hardware. Also have Velocity stacks and K&N filters for the set as well. I can provide pictures if anyone is interested. I used them on a 280z for just over a year and for the last three years have been in garage. They are in excellent shape! McKinney, Texas just outside of Dallas.

THis setup with K&N or similar air filter would run about $1400 (USA). I have a set and that's what I paid for them about 4 years ago. Need a set? Mine are for sale. Used for 1 year and sat for last three in garage on car. I just removed them and cleaned up for sale on eBay very soon.

Alex, I have a 71 240z that has been partial restore/mod. I have an IMSA body package on it ( flares all the way around for 10" wide front and 12" wide rear tires). The R180 has been replaced with and R200 and the 4 speed replaced with a 5 speed. The Interior has mostly been redone including door and hatch seals. The original head has been rebulit and has a mild cam in it. The engine block has not been touched. I have a 77 280z that I was going to rebuild the engine and haed to put in the 240z but lost interest and time about three years ago. They both have been in garages so the weather has not rusted them out as most you come across have done. Also have a set of triple 44mm Mikuni carbs on intake with velocity stacks and K&N filters as well, ready to go on a rebuilt z engine. If this interests you contact me and I will provide more info.