nix240z

These guys do quality work at a very fair price. Stand up Guys who stand behind their work, No questions asked. I mailed more parts off today to Mike in Las Vegas, and will be doing more in the future. I am repeat Happy Customer. Steve

the only difference is, that there is a slight curve on the downward turn on all 4 corners. Steve

I noticed them, with your description of slight damage. That was a good deal. Last few sets I watched went for $425-$599 range.

New plated 240z fuel and brake line brackets with bolts.

nice write up... When I did my dash repair I used fiberglass as a backing on the underside of the dash and filled the gap with great stuff spray foam. I also did an undercut on the dash cuts vs a straight cut. I did my dash over 3 years ago and still no cracks. Steve

The combo handle setup looks like this. http://www.240zrubberparts.com/apps/webstore/products/show/4818298

that is for the cable on the hand throttle set up.

The insert looks like these. It is two pieces, the insert and a clear boot over the top.

Do whatever will let you sleep the best at night. I used a heat gun and scraper to remove my undercoating. Also you better put that large rear fuel line insulator with your other unless you plan on buying a whole new set from me. Steve

and also the time and money to get these products to market, as I know that I have spent a lot of both. steve

That is Mike and Randy. http://www.classiczcars.com/topic/50741-while-they-last-extra-special-price/

Am faceplate.

I am not sure how long they will last either but I still have an original one on the rightside door latch on my 71 240z. It is a tight fit getting the new rubber on and in place. The rubber I use is industrial grade urethane, so if it fails it is not because of the product. and thanks for the order. I am all sold out now but making more. Steve

looks great.... steve

or get the complete 5 piece set and take all the guess work out of what you need. http://www.240zrubberparts.com/apps/webstore/products/show/4423585 Steve

I did a mod to my shifter today for the later style transmission into my 71. 20 years ago I replaced my transmission and I just cut the console. I found a pic of a modified shifter for my setup, so I set up a jig and did the modification. Steve

Chuck, can you let me know what style hood inspection lid bumpers you have on #390? Steve

69 hood and speedometer combo grommet.

Looks like I will be reproducing these early type hood inspection bumpers. Steve

coming soon... 70-71 AM Radio face plate fresh out the mold, test sample. The clear dial insert is also in the works. more items also in the works. Steve

Coming soon for the 69 cars... Hood release and speedometer combo grommet. Machined a new master grommet, which is just a little more beefy since the grommet will need to be cut and glued to fit the speedometer cable. Steve

Sweet.... Steve

Coming soon... part of the Series 1 rear hatch vent duct system. plus other items in the works.

I have been asked "if I had the brackets for the fuel and brake lines". Each new bracket is hand made and the holes have been punched out with CNC Strippit turret punch. Each of the brackets will be Cad plated plus the bolts will also be Cad plated. preview of the brackets.

another item plus more in the works. kick panel clips.