nix240z

I have purchased many parts from Al in the past. I had one problem and he made good on it, including all shipping costs. Steve

Thanks for sharing and great job. Steve

What a nice find....

IMHO the sunroof will hurt a bid on the price, so I say around $1000-$1200 max. If it was near me I would give $1000 if it had a title. Steve

look at your rubber insulators that hold the fuel and brake lines, if the ones in the transmission tunnel and the one in the center of the firewall above the transmission have 4 holes then you have or had the piping for the flow guide valve. If only three holes then no flow guide valve. steve

Add about $800-$1000 if you want to replace most of the small rubber grommets on the entire car. Great spreadsheet.

listing states "This listing was ended by the seller because there was an error in the listing." Item location: Imperial, Missouri, United States

choke plate plug for 70-71 center console. Reproduction plate also.

Sweet... Steve

looking good

There are a few little things different on auto and manual cars that you can look at. the console was cut for the auto shifter. 3 hole brake and fuel line insulators vs 4 hole for the clutch line. no bracket on right side of the transmission tunnel for the clutch slave hose no clutch stopper bracket or pad on the inside drivers side firewall. fire wall insulator will not be notched out for clutch stopper bracket plus other little things. steve

few sets in stock. steve

Datsun 240z rubber grommets & parts steve

here is my thinking on these clips. I make them in two types of hardness. I cant find a really good hard flexible clear type plastic, the best I can find is an clear amber. The clear amber will work great for everyday use. They flex really well and hold the correct shape. The clear are more rigid than the amber but also flex. So I offer up 4 clips, two amber for everyday use and 2 clear for taking your car to a show. You could remove amber clips and install clear at show, once done with show re-install amber. I tested the clear 100 clips and they did not break but I cant say for sure what will happen after a few months as the plastic gets harder with age. any input welcome. Steve

Carl, yes I have them but I am filling an order for someone. Once I finish that order they will be on the website for order. I wont take an order on website unless I have them done and ready to ship. These are direct reproduction of the actual nissan clips not 3D prints. Steve

Just for future reference on this thread, I have the plastic inspection clips. www.240zrubberparts.com Steve

I also have the clips in clear, these are just a little more rigid than the amber clips. As you can see on the picture that I tested these also and they did not break after 100 open and closes. I will be offering these as a set of 4 clips, 2 amber and 2 clear. I will be doing more testing on the clips before I put them up for sale on website. Steve

Update: 69 and early 70 inspection clips. I tested the clips and after 200 open and close tests, the clips did not break. These are available in a clear amber color. The Black was only a test sample. Steve

I have been working on a few other rare items. 69 and early 70 plastic hood inspection clips, this is a sample of the smaller version from a 69 240z. I am working on testing the correct plastic type for this application, so they will not break once in use. The early round type choke and hand throttle knobs. more items are in the works. Steve

Yes you will have to drill new holes. steve

aftermarket fenders made in Taiwan..

I purchased this cable from ebay for my 71 240z. You will have to drill a slightly larger hole in the mounting brackets under the car. Very easy mod. Steve

70-71 console choke plate, a reproduction of the best one I could find, after a long search. Only a few minor dings on the plate but very nice. I am also working on the square plug. 1969 240z maplight bezel in gray color.

Glad that I could help you out, your car looks great. Steve