Captain Obvious

Thanks again for the pics. I'm not sure how much emphasis I put on the picture in the Owner's Manuals. The little research I've done indicates that they changed the key blank and lock cylinder designs in the later years (in 76? 77?) and I wouldn't be surprised if they just never updated the pictures in the Owner's Manual. In other words, if I had to guess, I would say that the key design shown in the Owner's Manual is for the earlier years and they just never changed the pic. That key of yours... It has the key code stamped into it, right? I think I see something stamped in it, but can't quite make out if it's lettering or not. If it has the key code in it, that would add credence to it being factory original. I'm not in the business, but I doubt anyone cutting a secondary key is going to go through the effort to stamp the key code into it.

Haha! Good point... I didn't even check the delta between warm and hot before I posted that. In my defense, the last engine I worked on in that depth was my lawnmower, and it behaved exactly as would support my understanding. No worries bud. No offense at my end at all. I understand that it would take even more money to invest in parts that may or may not fix the problem. We're all at the point of long shots here, right? All of the easy stuff has been taken care of pages ago!

I was looking at this thing in a little more depth yesterday, and something that's interesting is that the "contactor" contacts when the ignition pickup is about mid-spaced between reluctor teeth. In other words, the contactor does not hit the cam lobe at the same time the reluctor is passing over the pickup, but in fact contacts about 180 degrees off that. Makes me wonder if they were expecting the reluctor to be pulled ever so slightly towards the magnet inside the pickup when the gap is small, and they provided the contactor to produce the same effect when the gap is at it's largest. WAG... Yeah, and funny about the number of teeth on that reluctor. Neat little typo you caught there.

Thanks for that. I took a look through the FSM and couldn't find anything. You're talking Owner's Manual, not Service Manual, right?

I'd like to see a better pic, but I don't really need it. I can tell which key that is. So no hurry. Thanks again!

Everybody has something they would like to see you try, and mine is trying a points distributor and maybe even a stock coil. I know it shouldn't matter, but it's just another variable that you could eliminate.

I believe much more in setting the valves hot than I used to. I'm no expert, but as I understand it... Why are there valve clearances at all? Because the valve stem grows in length as it gets hot. Exhaust valves operate much hotter than intakes, and that's why the exhaust valve clearances are always larger than intakes. If a valve lengthens so much that the clearance is reduced to zero, not only will you lose compression, but you may burn a valve. Why? Because the valve conducts a lot of it's heat to the head while the valve is closed, and if it never closes, it never gets the chance to lose that heat. That's probably a simple layman's understanding, but it works for me, and because of that, I put much more importance on the hot settings than the cold. :classic:

Haha! That is beyond my threshold for unnecessaryness, and mine is set pretty high! My intention wasn't to try to recreate the original. I just wanted to buy one. But first, I had to know what my target looked like.

Nuthin'? Nobody has ever noticed this thing before? I'm the first? Nobody has any idea what it's supposed to be doing in there?

Reminds me... Last time I was at the Sport-Import, it was about 50-50 between the stock-ish crowd and the ricer crowd. I remember a lifetime supply of fart cans, NOS bottles, chrome, strut bars, neon undercarriages, and head throbbing subwoofers.

I've got my distributor off my 77 because I've been messing with my oil pump, and while looking it over, I noticed a curious little nubbin I did not recognize. Upon consultation with the FSM, it's called "The Contactor". Here's some snippets from the 77 manual showing the little beastie: Ok, so the intention is to prevent hysteresis in the advance mechanisms. Fair enough. But what the heck? Is this simply some small amount of intentional friction to keep the thing from floating on any play in the system?

I've been to the sport-import show in the past with other non-Z cars, but haven't gone for a few years now. I do remember walking around and finding the Datsun stuff and not being impressed with the small number of Z's that were there. Unless I was in the wrong area, there were less than ten Z's spread over all the different generations. Also, there didn't seem to be any intermingling of people. Everyone was keeping to themselves and not much talking even amongst themselves. Maybe everyone was just tired or something, but I didn't get a "warm fuzzy". Do you guys enter cars, or just go as spectators? I've found from the past that it's much better to actually enter a car and drive in than go simply as a spectator. The cost is about the same, and you get a much better parking space.

siteunseen, Thanks for that pic. So you're sure that's an original 77 Z factory key, right? So unless they offered different blanks for the same year, my assumption is that the OEM Datsun key that I have here must have been for the 310, not a Z. Interesting that the head shape for that one is most similar to the "Great More" design.

Thanks BGM. Interestingly enough, on a completely non-Z related task, I was digging through some old keys at my end this afternoon, and turned up an OEM Datsun key. I've owned two 77 Z's in the past, as well as an early eighties 310 hatch, and I don't know what car this key was for, but I can pretty much guarantee that it was one of those three. I don't remember what the 310 key looked like, but this key has the correct profile for the locks on my current 77. Here's a pic of the key, and you can see the key code stamped in it, so I assume it's factory, but I can't be sure if it was a Z key, or a 310: Here's the OEM key with some of the aftermarket options. Left column reading down: OEM, Taylor X7, ILCO 62DU. Right column reading down: Great More (? number), Axxess 32, HY-KO TR25 (Toyota) The Great More key is the ones that you get with the ebay supplied ASP cylinders and locks. The HY-KO TR25 is traditionally a Toyota blank and it would work, but the depth stop shoulder is a little too deep, so you would have to shorten the tip a little to account for that.

I'm stuck at the same question and I'm not endorsing the KD needles thing. ZT put your carbs on their car and they said they were fine. Why would your car need so much more fuel than theirs? Also, about your piston springs. Why would you, just you, and no other Z owner need to run stiffer springs in their round tops? Why? Why? Why? I'm just not buying it. So what about your results with grabbing a handful of choke while it's popping and having the problem go away? The results clearly indicate that your car runs better with more fuel being supplied, but does that absolutely guarantee that the root problem is in the fuel system? By that, I mean... Is it conceivable that the problem is ignition on the hairy edge of not working and the reason the problem goes away with a handful of choke is that the richer mixture burns so much easier than a leaner one? Ignition isn't my stong suit... Leon? Conceivable?

What did the original factory key look like for the Z's? I'm mostly interested in the later 280 years and I know the blanks changed over the years with earlier years being different than later 280 years. Anyone have a key that they know was the original key to come with a 280 when new? I've been working on the locks for my 280 and I'm nearing completion and I've been thinking that it would be nice to have a fancy factory looking period original key to go along with my nice reworked locks. I've already got aftermarket keys that work great with my locks and I know it's completely esoteric and unnecessary, but I think it would be a nice touch to have an original factory looking new key. I'd be willing to spill a few unnecessary bucks for the feel good effect. I've been through ebay, and can't find anything truly conclusive. So, anyone got pictures? Links? Anything?

Glad you've got it licked and I wish you good luck with the smog. So... What's your plan with the original flat tops? I'm going to be putting my 74 up for sale and I'm not sure I want to saddle any new owner with my modified flat tops. I mean I think they're better than original, but it's not like you can open up the manual anymore and have everything look right. It's a labor of love, and I'm just not sure it would be a good idea to pass those mods on to someone else unless they know what they are getting into. I don't want a future owner taking his car to someone for work and having the mechanic go "What the heck is that? That's not right!!" Haha! Does that make any sense at all? Anyway, it sounds like your flat tops are in pretty good shape and if so, I could give them a much better home than the bottom of the lake. If they're going to end up as boat anchors, send me a PM instead.

Bummer. Well it was worth a shot. I've not tried opening the glove box by removing those 4 screws, but it really wouldn't be that secure of a compartment if it were that easy, right? Anyway, don't force anything, and I agree with Unkle... It's time for a locksmith. Something to think about though as you are talking with the locksmith... I suspect the real problem is more complicated than you've described. I've taken apart all of the locks on my Z and I've found the glove box lock to be the least used and best condition lock on the entire car. I bet that yours is the same. So what does that mean? That means that if you're having problems with the glove box, I bet the problem isn't with the glove box at all, but with the key and other locks on the car. Your previous owner has vouched that it used the same key when he owned the car, so maybe the owner between the two of you had the ignition lock re-keyed or replaced. Or, maybe they are still the same key, but the key and ignition lock are both so badly worn that they work together, but the worn key won't work in the unworn glove box lock. Bottom line, is I suggest you talk it over with the locksmith and explain the situation to him and see what he suggests. The real solution might be to replace the ignition cylinder using the original tumbler sequence and have a new key cut to work with the original code. Then that new key should open the glove box just fine. Does that make sense?

olzed, Thanks again. I appreciate the attention. I'll let you know how it turns out when the new pump arrives.

So the bottom line is that you cannot put the drive shaft in from the top, so the only way to prime the system is to drop the pump a second time to install the dizzy drive shaft from the bottom when you're done. No magic bullet. I was wondering about that... I have not drained my oil and my filter should still be full from the last time I shut the motor off. Except for what has drained from gravity and siphon effects, all the oil passageways should still be full as well. I plan to do an oil and filter change when this is all said and done, but I was planning to wait until after the pump replacement was done. So you're thinking that if the filter and passageways (and hopefully bearing journals) are already full, then there's really no reason to prime the engine at all. It's already done. Just fill the new pump before I put it on and be done with it, right?

BGM, You are the man! I don't know how you find this stuff, but you are the Jedi Master of topic appropriate pics.

Wait a minute... Are you saying that I can drop the distributor shaft in from the top? It doesn't have to go in from the bottom?

Another option to be able to separate idle from the rest of operation... Flat tops! (Haha! Someone has got to come up with a "poking the hornets nest" smiley.) :bandit:

Just started a priming specific thread.... http://www.classiczcars.com/forums/showthread.php?45440-Priming-New-Oil-Pump-How-to&p=392008#post392008 Let's hope that all the priming wizards catch wind.

I've got a new oil pump on order for my Z and it should be here soon. While waiting for the pump, I've been searching the forum for info about how to prime the new pump after installation, and I've found some threads that talk about it, but I'm not sure I get it. I got the general procedure: Bolt the oil pump to the block and then spin the pump with a drill from above down the distributor hole. But... It's my understanding that the distributor drive shaft has to go in from the bottom before the pump is bolted into place, right? And if that is the case, if you try to spin that shaft with your drill, you would be trying to spin the engine with your drill, so... Of course, I could install the new pump without the distributor drive shaft, prime the system, and then drop the pump again to install the drive shaft. But is there a better way? Has someone got a magic way to prime the new pump without having to take the pump back off again to install the distributor drive shaft? :bulb: