siteunseen's Content - Page 26 - Classic Z Car Club Skip to content

siteunseen

Community Member
  • Joined

  • Last visited

Everything posted by siteunseen

  1. If it's a '75 it should have an n42 head with the pump hole already there, at least mine does.
  2. Join our club. Put those SUs on a 240. I don't think my stock efi supplies the fuel when it could. It seems like a bottleneck compared to the carbs. The carbs get in the redline and won't stop until you decide. Efi seems to have a governor built in somehow with all the components. I'm talking stock stuff, no work arounds. On newer cars and bikes you have to re configure the ecu to get all the juice squeezed out.
  3. He goes from efi to SUs here...
  4. The pictures are great. I know someone that bought a '70 that's enjoying you thread. I know I am.
  5. I rembered what you MUST be good at, in my mind anyway, Tetris. You have that way of thinking. "It'll fit, I know it will". Proof is in the pictures.
  6. Says here 1/2 NPT... https://www.zdriver.com/forums/240z-260z-280z-s30-forums-9/transmission-differential-drain-plugs-37496/
  7. You got my spring cleaning kicked up to high gear, thank you for sharing your projects with me/us. It's a great motivational "speech".
  8. I have the OE belts in mine but if wanted something better I'd google "240z seatbelt upgrade classiczcars.com"
  9. I've found putting mine on ramps to raise the front and a pillow or two on the door sill is really helpful. After watching the video I think I'll use two milk crates to lay on from now on. Thanks for sharing that @SteveJ
  10. Yes! The middle tag part slides into the other panels and is held in place by the small rivets like Yarb referenced.
  11. They're regular tag hold down screws. I found a picture that shows I used the carded "Help" stuff from a chain store, they're plastic.
  12. Yeah my 240 has the bottom "J" looking holders but 2 screws up top.
  13. I have a picture of a girl called Flower and it's NOT because of her sweet smell. The complete opposite actually. Happy birthday!
  14. The pull cord releases the latch that locks the hood down. Normally done with the t handle in the cab from what I understand. My '72 has been replaced already by the PO.
  15. I'm anxious to get and see some photos of our cars during this super hyped eclipse. We had one in 2017 and although I took some cool pictures of light shining through the tree leaves, they looked liked stars all over my yard but wow for 5 minutes. Here's the closest picture I have of what this "purkinje" is supposed to be.
  16. So I could do this and pull the cord from underneath, right? That's a great idea. I've broken one when I was younger and it was an ordeal from what I remember. Thanks Chris.
  17. They'll relax alright, anxious to lay down too like me You have some Alabama air in your shop now! That place is about 30 minute drive from my house, Anniston, Alabama.
  18. I be damned if I'd told that!
  19. If zcardepot doesn't have stock check futofab.com. that's where mine came from. From what I've read they're from the same supplier? Mine had VIETNAM on the boxes. Very happy with them too, OE bumpers are in storage for the next babysitter.
  20. My '72 has those wires going over the top of the holes which brings it about 2 inches farther away from the road, there's a pretty wide gap between the chin spoiler and the front clip. The curiosity was killing me! Did you have enough grommets for the rear panel the fuel vents go through to the emissions tank?
  21. Alcatraz Swimming Team I sure do like my #918. It's like the #110 I had for awhile, the lighting is the main determination, red, orange?
  22. You could also check were the cable attaches to the transmission.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.