Everything posted by tamo3
-
Lost key! Replacing tumblr, now can't lock the door
Captain, Yes, once I get new tumbler, I need to re-key for ignition and rear hatch too. I installed this tumbler and I realized that I broke plastic part that connect to the bar. I use wire to manage the looseness and now everything is working! Thanks again for all!
-
Lost key! Replacing tumblr, now can't lock the door
-
Lost key! Replacing tumblr, now can't lock the door
Oh my god! I missed those great post! Thanks Captain Obvious for the link! Those are one of the greatest creative way to solve 40 years old issues. Regards, tamo3
-
Our 1978 California 280 Z Restoration
Excellent restoration!
-
Lost key! Replacing tumblr, now can't lock the door
Thanks for your feedback and take your time for investigating. I diagnostic the issue based on your feedback and I discover my tumbler is already worn out! That's why I can't lock the door. I'm getting new tumbler from ebay now... Thanks! tamo3
-
Lost key! Replacing tumblr, now can't lock the door
Uploaded video clip. Also, I found broken plastic parts at the bottom of inside of the door. Does anyone have clue?
-
Lost key! Replacing tumblr, now can't lock the door
I'm so stupid I lost my 240z key and I don't have spare key. I was planning to replace key anyway. I have a whole set of replacement tumblr. After struggling unlock the door using wire hunger, I managed to open the door. Remove door inside panel and replace the tumblr. Now, I can't lock the door. When I insert key and turn the cylinder there are too much loose connection. Does anyone have tips to adjust lock? Thanks, Tamo3
-
New member from SoCal
Welcome Walter and sorry to hear the news for the 1st post. Hope your Z fixed up easily and start running on the street soon.
-
Getting my 72 Z To Run
Why are you trying to avoid cranking engine? Plug clear tube in the fuel line and crank the engine is easy way to find out whether gas is coming or not.
-
1973 240z Refreshening Thread
Congrats, Grretc! Nice finding! What happen to your HRS30? Are you going to restore both?
-
Rating the factory 240Z fuel vent hoses
I saw a photo from RatsunZ. Does anyone try this unicoil hose bender for using this for 17235-E4601, Large diameter hose with several preformed bends, including a 180 degree bend? Do you think it's safe to use it for vent hose?
-
n-42 Carburated Head
I think dhp123166 is talking about intake drilled for injector tips. Maybe the head is modified and filled the injector tips hole for intake port.
-
Banned from HybridZ? Or.....???
-
Which way is the zero of pulley timing mark on 240z?
Thanks so much for the advice. I was lazy to avoid open valve cover and check TDC. In order to get accurate TDC with pulley mark, I understand what I got to do. FYI I try to install 280z timing mark plate onto 240 P30 block, but the screw location is slightly different from N42 block.
-
Which way is the zero of pulley timing mark on 240z?
Hi, I just got Xenon Timing Light to measure ignition timing. When I look at pulley timing mark, I can't tell which side is zero since it's different from 280z timing Is top one the zero or the bottom one in the picture? When I look at FSM for '72 240z said "The top dead center is located extreme left as viewed from inspectors side." Thanks for the help, tamo3
-
Monster Truck version of 280z
-
Engine cranks, but it won't start (No Spark)
basic test for spark plug. Does this help?
-
Tach will not work with Petronix
Easiest way is to swap with 280z Tach or after market Tach. http://www.classiczcars.com/forums/showthread.php?t=42405&page=2&p=365658&viewfull=1#post365658 How to Swap. Blue's artcile. http://www.classiczcars.com/forums/thread47191.html
-
Rebuild a distributor?
-
F1 live streaming
What a e citing race! I can't go to Austin to watch F1 race two weeks later since I will be I in Japan....
-
Sub-diodes - 1978 alternator internal voltage regulator
Isn't it faster and easier to pick up another alternator from junk yard to swap? I pick up '82 Maxima alternator and get rid of external regulator from 240z.
-
repro window sticker
I created repro window stickers. It's not perfect, but you can modify it using Acrobat to hide "typewriter" layer. Enjoy! Window_Sticker_tamo3.pdf
-
A few reproduction interior stickers.
Is that for 280z or 240z? I'm interested in if those are for 240z. Thanks, Tamo3
-
Backfiring (from the intake) and other troubles.
I had similar issue with you. So, did you watch Z therapy DVD? You can learn a lots of SU and how to adjust. Sounds like your carb setting is too rich. Too much fuel when you step on the gas pedal. I had same issue and adjust float level will be fixed backfire issue. Also, valve adjustment will help you to easy to ignite engine too. Highly recommended.
-
Pertonix Ignitor 1761 + MSD Blaster2 does not start up engine.
Follow the FAQ on the manual, connect red wire directly to battery to try to start, no luck.