mikerosa

I got the 71 240z with a five speed upgrade...when i hit about 65mph in 5th gear iam getting this vibration thats deep and loud...so far we did,,new u joint and rebalanced the driveshaft...new halfshaft u joints..wheel bearings were done last year by PO...Has anyone seen this before? whats next is the rear...Any ideas/HELP....thank you

Yes planning on leaving the tranny in...I have a 70 with 140k on the clock??? compression is like 125-130 on all 6....so a friend has this 73 with a rebuild engine.so goes the story??? what is normal compression like 150+? did not get a chance to do the test on his engine but Iam thinking of doing a swap...OR does anyone know of a nice tight motor for sale in nyc area.. Should I try to find a later p79 from a 81 and rebuild it??? dont know what is the best way to approch this...Any ideas? not looking to add the headache of tir webers....SU are fine with me...any input or help is welcome!

thank you!

Hello,,,new to the z world and need to pull a engine from a 72 for a friend...My question is, do you have enough room to move the engine forward after removing all bolts from bell housing to clear the imput shaft from the clutch ....OR is it like jags that you need to remove the engine and tranny as one unit? THANK YOU!

Thanks

A 71,,looks like card board

Hello ,,,The P.O. removed the glove box to replace the blower. never installed a new glovebox..I took a quick look and cant see how this fits in...Is there any special thing i need to do....it does not go in from the front and cant seem to fit from the rear...this is just that cardboard box...Any tips? THANKS

well they moved those mega-speaker cars to there own show! you may have a enjoyable weekend...

were in new york??? I have the same in the that color....Iam in the white plains area,,,hope its close...

thanks guys! is there a new york z club ?

YES NO CORE and 300 for shipping>>not looking for a monster motor ...260 engines are higher hp stock then 240's right?

Can someone tell me the differance between the 240 and 260 engines ? hp? has anyone had any experience with these rebuilt engines from Datsun LLC in California,,completly rebuilt with head for 2k +shipping...seems like the way to go,, R AND R and no bull from local machine shops that dont work on these engines on a regular bases...or does anyone have a machine shop they use and are happy with in the White plains new york area... THANKS

Well like i said before...dont want some guy who always want a z or had one years ago to get hammered...when i first saw that car i thought it was a parts car..fred flintstone would have loved it...this guy screwed over many ..that is his third ebay account...he re-vin ed a 1800s as a 71.....the poor guy shipped it to california, paid 10k, then went for inspection discovered he can't register it....so he has a 12k paperwieght...Thats just wrong! so I hope they throw his arse in jail...BTW ebay would not help the buyer...

yes why

I can only hope no one here bought that car!

haha....I love it! when i finish my 67 1800s the z will come in the shop!

HOW MANY OF YOU FOLKS GO TO THE IMPORT SHOW in CARLISLE PA?

Can someone please tell me the routing of the wire that goes to the horn button...when i make a left turn horn BLOWS..so its grounding out somewhere....were does the wire go from the button? were can i get a print?

Thank you!

when you try to do good there is always a clown to knock you down. I bought this one 130650970722 so no reason to bid ...besides this orange z was badly rusted and poorly repaired..just trying to save someone from making a mistake,,THATS ALL!

Buyer beware! this guy is a scam artist..notice zero feedbacks,,thats is 3rd new ebay account cause all the others had many negitives..This car was a rot box ! poor repairs and back yard paint job...rusted gas tank too ! hate to see anyone get screwed....

HELLO,,I HAD a z many years ago and Iam looking for a nice clean example...no rust no autobox..east cost would be nice but will ship....Please help if you know of one for sale...must be earlier then 73... email or call MRVR1800@AOL.COM 914 -2611879 THANKS ! MIKE