Yellow78

I have access to a CNC router so I just made the one I need.

Here is a look at the holders that I made.

Yes it does look a lot like there’s but I built my own and also made my own hole holders to keep wires apart.

New 8.5 wires

View Advert 280Z Bumper End Caps I have a set of all four corners, bumper end caps for 280Z Price negotiable Email me eeeilers@gmail.com Advertiser Yellow78 Date 03/22/2019 Price $1,200.00 Category Parts for Sale

View Advert 280Z Bumper End Caps I have a set of all four corners, bumper end caps for 280Z Price negotiable Email me eeeilers@gmail.com Advertiser Yellow78 Date 03/22/2019 Price $1,000.00 Category Parts for Sale

Thank you and all the help Z Car Club members, got the car up running have to set the valves and timing but running well. Sent from my iPad using Classic Zcar Club mobile

L”. THE NEW Fuel System 1. Brand new in-line AIRTECH fuel pump. 2. Brand new rubble lines 3/8” from tank AIRTECH PUMP. 3. Brand new rubber 5”/15” fuel lines to AIRTECH fuel pump. 4. Brand new rubber 5”/15” fuel lines fuel filter. 5.Brand new rubber 5”/15” fuel lines to Brand new PELLERT rail. 6 Brand new rubber 5”/15” fuel lines out PELLERT rail. 7. Brand new rubber 5”/15” fuel lines out to a FUEl REGULATE; 8. Brand new rubber 5”/15” fuel lines in of FUEl REGULATE; PELLERT. 9. Brand new rubber 5”/15” fuel lines out of FUEl REGULATE; Again thanks for all you HELP

I went with theAir tank pump seems to work fine at 40 psi also replaced the fuel regulator car runs like a champ thank you everybody for helping me find Gremlins. Sent from my iPad using Classic Zcar Club mobile

Thanks for the info I think I’ll go with the AirTech pump. Sent from my iPad using Classic Zcar Club mobile

Fusion on which pump to get. Will make a decision and keep you all posted. Sent from my iPad using Classic Zcar Club mobile

That’s the same pump that I got from a different vendor on Amazon and only get 26PSI. AirTech unit does not say how much PSI or GPH. Sent from my iPad using Classic Zcar Club mobile

I talked to z car depot and they said they sell these to a lot of Z owners and it’s a good price. Plus it has a nice filter before the pump. Can’t find anyone to actually tell me what BOSCH unit would work and is available was not copied crap. This is the first pump besides the stock ones. With everything hooked up correctly I got Carly 2PSI with return lines back to the tank if I clamped off I only get 26PSI. Sent from my iPad using Classic Zcar Club mobile

With the aftermarket pump that I had on the car was only giving me 26 PSI there was plenty of fuel at 26 PSI coming to the filter under the hood. Of course 26 PSI is not enough to keep the L6 running correctly. At this point I’m sure I’ve got a bad pump from the supplier, I will return it and get a different pump. Thanking of this one: https://zcardepot.com/catalog/product/view/id/2535/s/electric-fuel-pump-and-filter-combo-bracket-efi/category/349/ Sent from my iPad using Classic Zcar Club mobile

OK I did the electrical just like the video and I came up with around a 2 V drop Sent from my iPad using Classic Zcar Club mobile