Yellow78

Look for any one who has a set of lower control arms for sale chreap. I'm going to rebuild my lower control arms with a camber adjustment and do not want the car off the road the whole time. I got a 78.

Put a MSA performance 2 1/2 inch on my 78 sound great. Also put LED dome light in.

I'm running redline it now that help a lot. I have replace slave cylinder and when with a SS line. I got the clutch disengaging I think all the way you possibly get out of it. The car sat for 20 years and only has 27k on it.

I have a 78z that the grinds when shifting from first to second and then from second to third. It works ok if I shift slow but if shift fast or high RPMs I get grinding. So I want to replace the transmission but not sure which one to go with. Should I go with the Nissan close ratio transmisson from 81 to 83 or the Borg Warner T5? I would appreciate any input.

I did not any in the OEM wiring harness that I saw so I ran a new one.

Yes and I ran wires down the foot wells a now light in the foot wells.

Found the problem, had a bad connector on the power line. Thank all for your input.

Yes the stock dome light work before I put the LED.

I'm losing all the power when I plug in the LEDs. Could it be a amp drop because of corrosion?

I have check the light in series on the battery and nice and bright. Get 12 v on the dome wires, door switch works fine. I'm stumped

I have try that.

I have I'm stumped. All the switch are working fine.

So I'm trying to replace my dome light with LEDs. *I check the LEDs on the battery and a nice bright light. So up at dome wires I check and get 12 V. but when I hook up the LEDs to the dome wires I get a real dim light. 78 Z

Im looking to lower and get some camber 78 rear. I wanted to see if any one has use the MSA rear camber kit and if so how did it work good or bad.

Frank this is the one you had clearance issue with. http://www.thezstore.com/page/TZS/PROD/PSDC03/23-4201

I'm looking to add a Strut Bar to my car and looking for help the best one made for a 78.

Where the stripes on 70's Z's flat black or glossy black. Thinking of putting racing stripes on want to make it look as stock as possible.

Here is mine 78 with 23k

I love this forum. It help save so much money.

Have not had to get replacement part car only has 23k on it

Yes that what I've done now. I'm just using a big washer for now. But want to get a stock one back on the car.

I saw the add for Gforce at the top of this web site and was wondering if any one has put one in a 78 z?

OK I rebuilt the front end of my 78 280z and all went great but after a week or so had a bad nose in the front end when backing up. So look under the car and one of the front tension rod was loose and lost the nut and washers. My bad for not tying the nut up. Any one got one off a parts car?

Ok I rebuilt the front end on my 78 280z and one of the front Tension Rod bolts come off and lost the front Tension Rod Washer any one got an extra one? The rebuild went great except for that.

Frank: I'm glad to hear that you are OK, driving in Houston suck. I live in Houston if you need help pulling her a part. Eric E.