Jump to content

hatepotholez

Free Member
  • Joined

  • Last visited

Everything posted by hatepotholez

  1. how does anyone remember what bolt and nut goes together after this?
  2. Thanks, that is a great site! Ive been following it for a few weeks now. Sent from my iPhone using Classic Zcar Club mobile
  3. Thanks. Quick question in regards to the flasher. If I read the wiring diagram correctly, the white wire connects to the green wire on the turn signal switch and the green wire comes from the hazard switch, which comes from the fuse box? Sent from my iPhone using Classic Zcar Club mobile
  4. Ok so I found the spring and cap, it was on the floor [emoji849]. I inserted it back into the headlight switch, so it does use both spring and caps for my switch, for a total of 4. Before it would just turn on the headlights only, now it turns on the parking lights and headlights. So that was a learning experience! On to the turn signal and horn. Sent from my iPhone using Classic Zcar Club mobile
  5. No problem. Sent from my iPhone using Classic Zcar Club mobile
  6. Thank you for the offer, but Don is sending me some parts. Would you know if I am missing a spring and cap or all switches only have 3? Sent from my iPhone using Classic Zcar Club mobile
  7. Would anyone know how many spring and caps are supposed to be there? I only saw three when I took mine apart. And I believe that single one goes to the headlight portion? Sent from my iPhone using Classic Zcar Club mobile
  8. Agreed. I was considering going all led [emoji41] Sent from my iPhone using Classic Zcar Club mobile
  9. It's from a 72. Pm me how much you would like [emoji16] Sent from my iPhone using Classic Zcar Club mobile
  10. Sent from my iPhone using Classic Zcar Club mobile
  11. remove the whole thing off the board? I broke the tab that holds the metal blade in place, it's on the right side.
  12. hmm good idea, I can solder it and then file it down.
  13. I beleive so. I wanted to take a wack at it before I send it off to be rebuilt.
  14. Wanted to rebuild the combination switch and broke one of the tabs holding down the metal plates. Not sure what to do now. I'm guessing I need another switch? Sent from my iPhone using Classic Zcar Club mobile
  15. hatepotholez posted a post in a topic in Body & Paint
    Thank you for the grill mounts, I just received them!
  16. !! Sent from my iPhone using Classic Zcar Club mobile
  17. awesome, thanks so much!!
  18. Would anyone have pics of where the relays screw into? I believe the 3 prong relay, green, green/red and green black screws on behind the drivers vent by the knee. The flasher I'm not sure off. And there's a relay block on the right side? Sent from my iPhone using Classic Zcar Club mobile
  19. hatepotholez posted a post in a topic in Wanted
    Thanks!
  20. hatepotholez posted a post in a topic in Wanted
    Yup, I am guessing these are the pieces that connect the 3 large pieces?
  21. hatepotholez posted a post in a topic in Body & Paint
    Thanks so much!! I appreciate it!
  22. I can try, once the comes in I'll take a look. Sent from my iPhone using Tapatalk
  23. hatepotholez posted a post in a topic in Wanted
    Looking to buy the 3 small trim pieces that go on the hatch glass weatherstripping. I have the three large ones but missing the small ones.
  24. hatepotholez posted a post in a topic in Body & Paint
    Thanks so much, Pm sent! Sent from my iPhone using Tapatalk
  25. I think I may have found what my green,black black connector goes too. Apparently it is a warning buzzer for the auto lock retractor? I found it on the 73 FSM, it may not be functional on mine.

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.