Jarvo2
Member
-
Joined
-
Last visited
Everything posted by Jarvo2
-
The air galley is the device that the smog pump pushes fresh air into the exhaust manifold with. Most of them are leaking or damaged by now.
-
The popping on deceleration is unburnt fuel leaving the combustion chamber into the exhaust system & combusting (burning) due to the heat in the exhaust. I solved mine by removing all of my smog gear, capping off the air galley and leaning out the carbs. Sent from my iPhone using Classic Zcar Club mobile
-
I have the MSA stock manifold kit and really love it. Sounds much better than my twice pipe setup and bolted up nicely.
-
I'm not using my Altima spare & happy to let it go for $50, located in Chicago for anyone local.
-
I have a first generation Nissan Altima donut that works well. Its thin enough so it should clear the bigger brakes. Here's an example: http://www.ebay.com/itm/93-97-Nissan-Altima-OEM-temporary-spare-rim-tire-donut-wheel-125-70-15-/192039515577?fits=Model%3AAltima&hash=item2cb67275b9:g:WlgAAOSwEzxYPHzU&vxp=mtr
-
-
-
Try putting fuel pressure regulators between the metal fuel rail and each carb (2 regulators) and run. Stronger psi through the main fuel line (bigger pump). I would not for for a fuel injector pump as 60-90psi will blow out the fuel lines, but a steady 10psi should prevent percolation Sent from my iPhone using Classic Zcar Club mobile
-
All items have been sold.
-
Fuel Filler neck sold!
-
Emissions hoses & parts sold Sent from my iPhone using Classic Zcar Club mobile
-
Antenna is sold. Sent from my iPhone using Classic Zcar Club mobile
-
PM Messages sent, will post the pictures of everything else shortly.
I got a 4.11 "k" r180 which bolted right up to my '72 240z and it's a lot more fun to drive now!! Sent from my iPhone using Classic Zcar Club mobile
Wondering if these could be euro springs based on the red/blue marking and the yellow that now appears to be white. Pulled them off of my '72 240z. Can anyone confirm? Sent from my iPhone using Classic Zcar Club mobile
Yes I do still have my 280z speedo cable. PM me if interested & we can talk price/shipping Sent from my iPhone using Classic Zcar Club mobile
Datsun 240z garage sale! These came off of a running '72 and are in used condition. All prices are OBO, plus shipping from Chicago. Happy to bundle items and work out a mutually beneficial deal. $75 Carb parts lot: 2x bodies, fuel bowl/lid, etc $125 Miata seats with headrest speakers $20 transmission plate $30 2x front calipers with newer pads <<SOLD>> $20 fuel filler neck $5 speaker and bracket (damaged) <<SOLD>> $15 electric antenna - broken mast <<SOLD>> $20 Emissions hoses and carb controllers $20 pre-heater manifold pipe $5 voltage regulator - no connector $30 alternator $10 water pump - used $15 water pump - looks unused $30 smog pump $10 battery wire harnesses $20 Bosch spark plug wire set $15 oil pump $20 dwell / rpm meter - looks new, never used so condition unknown $20 manual mechanical tachometer $40 misc gauges and testers $10/set wheel chokes Sent from my iPhone using Classic Zcar Club mobile
Lots of SU round top parts from 3 screw and 4 screw hitatchi used on the 240z. $125 shipped anywhere in the USA. Everything has been degreased. Includes 2 bodies, 1 dome, 1 piston, 1 float bowl/cover, 2 nozzles, 2 butterflies, 2 throttle shafts, and everything else pictured. All are in used condition sold as pictured. Sent from my iPhone using Classic Zcar Club mobile
I have an extra original speedo cable available, although shipping to panama would be quite a bit I would think.
I've got a complete set of driver & passenger 1972 240z seat belts that are sitting in a box in my attic, along with the receivers/sleeves. Perfect candidates for re-webbing if anyone is interested Sent from my iPhone using Classic Zcar Club mobile
Good you didn't go for the $1700 used set! https://www.ebay.com/itm/122335865790 Sent from my iPhone using Classic Zcar Club mobile
I have a vintage set of welded twice pipes that have glass packs near the transmission tunnel and they are way way too loud! Pulled them off and got the MSA exhaust system and am very happy with it. Anyone near Chicago interested in my twice pipes are welcome to them for $150. Sent from my iPhone using Classic Zcar Club mobile
Why not just build one? I spec'd out one made from 2 harbor freight engine stands and several pieces of square tube for less than $200. A used professional rotisserie will go for over $1000! Sent from my iPhone using Classic Zcar Club mobile
Mine required quite a bit of sanding to make it sit flush against the decklid and the mounting bolts are not exactly lined up (each one is unique I believe). With that being said, its overall a great piece, much better than the cheapo's that you find on eBay.
Important Information
By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.