JeffMopar

JLPurcell, Thanks for the reply, I started cutting the spot welds on the quarters in the back and cut out the rear hatch panel at the top. It looks like I will be able to use the Motorsports lower panel for the rear with a few minor patches above it and use the new rear hatch patch panel I picked up from Courtesy Nissan. I ended up ordering the rear outer wheel wells from Black Dragon (formerly Victoria British). It semms the farther I get the more I find wrong.

Hello, this is my first posting after having been a member for quite a while. I can usually find what I'm looking for but will have to ask for help. I have a 1972 240Z that I picked up from the original owner in 1988. It was used as my daily driver for about 5 years and then parked. I spent the last year putting up a large garage to work in (25'x40'), which gives me room for all my tools and whatever car I am restoring at the time. So now that I finally have a place to work on the Z I started tearing it down. I have replaced the drivers floor and support and am working on replacing the quarter panel and rocker panel. My problem is that now that I am working on the rear to remove the quarter it looks like I need a taillight panel (the piece that goes from taillight to taillight and includes the valance) the ends look good but the main center is rusting through. Does anybody know if this is available and from who if so? Sorry about the long message but figured I should put as much info as possible. Thank You