bryantatem

What are you looking for?????

That is what it looks like to me...

practicing on small pieces of metal will be good practice for you. AS far as a place to weld, I can't think of a better place than the floor. It is very well covered by the carpet and also from the outside. As far as having someone do it for you, try to find a mobile welding service or find a freind that knows how to weld. I am lucky, the local community college welding school is local to me and needs things to weld for class. Since I am not in a hurry, my car makes a good canidate. Cheap too. -Bryan

THe TOKIKO are just bolt in, and with the springs it lowered about 1/2 to 1" BIG BIG difference!!!

Yes, after rebuild, just bolt right on and hook up the choke cables... Pretty easy conversion and GREAT IMPROVEMENT!!!

DEFINATELY worth the few dollars. A sloppy shifter will just drive you nuts and possibly embarass you if you miss a shift. Hate to watch you turn red if some ricer beats you from a red light.....

Goin twice....

GOIN Twice....

Yea, the change is relatively easy. I have recently changed over my 71 240 from auto to man. PM me if you need some help... -Bryan

KMACK- you have spent too much time in the monkey cages... I drove it to the San Antonio Car show

KMACK's old engine is a good running engine. I have driven his car and it does run really nice. Good engine. It gets my seal of approval.

That is about the only choice that you have, either live with the chalk, replace them, or remove them. I have 2 in my garage and I get it from BOTH sides whernever I exit the house from the garage, but at least I match.

Try again. I was waiting for the pictures to get OK'd. they are there now... -Bryan Tatem

Yes it will. THe only thing you MIGHT have a problem with is if you have the emission ports in your old exhaust manifold. This header does not have them. You could eliminate them if your car is so equipped. -Bryan

I also have a set of 4 screw SUs (early) for sale with intake manifold. $100.00 They need a rebuild, but I have made them run good. PIC IN GALLEREY My 71 needs a clutch, this is the only way I am allowed to fund this.

I have a 3-2 square port header for sale. VERY NICE GOOD CONDITION!!! I need a clutch set for my 71 240... ASKING $90.00 PICTURE IN MY GALLERY bryantatem@charter.net

I tried to GIVE AWAY better crap than that and got no response...

place the cam in the head then rotate it until no lobes are touching the valves in #1, and with rotation the exhaust valve will hit #1 next. (the piston in #1 is Top Dead Center) To make the smaller adjustments, the cam gear should have a marker dot to go in line with the mark on the chain and the mark on the crank.