Jump to content
Remove Ads

Carl Beck

Free Member
  • Joined

  • Last visited

Everything posted by Carl Beck

  1. Carl Beck posted a post in a topic in Open Discussions
    I can't get over how clean the undercarriage appears to be.. I'd need to see a picture of the entire center section of the exhaust system to tell if that is the original resonator - I can tell you that my White 72 with 80K miles still has the original exhaust system.. so it is not unusual. keep at it.. Carl B.
  2. No - a very late 71 Model Year. It has the "A" type tranny and center console.Some were produced into 09/71. 72 Model year started production in in 09/71 with VIN's starting at 46001 FWIW, Carl B.
  3. While it is up on stands - get good pictures of the floorboards and frame rails - as well as the entire undercarriage. Keep it as close to original or at least Stock as possilbe. It will sell faster and for more money that way today. Regardless of the actual mileage, or condition of the engine - most buyers for a car like this want the engine compartment to look as close to original as possible. So a well detailed engine with block painted etc will be a big plus when selling. Depends on local demand - but when finished $16K to $18 would be a bargain for the buyer. {if everything is done right}. I also agree with the full dash cap.. cracked dashes are just ugly...and turn buyers off FWIW, Carl B.
  4. Carl Beck posted a post in a topic in Open Chit Chat
    Gee - I must have arrived here just after that Amazing Event!! Even then I would not have expected that in CLEARWATER!! FWIW, Carl B.
  5. Oh.. ya.. right. I was focused on the shape of the wheel rim lip.. I've always liked the Appliance Wire Mesh wheels.. FWIW, Carl B.
  6. A couple of thoughts.. 1) Wasn't someone offering a $1000.00 reward for finding those wheels?? 2)Not to be critical - but I wish everyone would put that actual SUBJECT of their Posts in the SUBJECT LINE. That makes it so much easier to find by people searching for the information and pictures in threads like this. How about; "Refreshing My 72 240Z - a project" 3) Looks like you have a pretty nice 240Z to start with - and they are always fun to work on. 4) Your spindle pins came out with just penetrating oil - I don't want to hear it !!! 5) Good luck with the project - enjoy the process... FWIW, Carl B.
  7. Very nice clean lines - pull the Buick V8 out and replace it with a Buick Turbo V6 and you'd have a lot of fun.. No idea what it is worth to anyone - but the $75K asking price doesn't seem to far out of line. Really not too much in common with the Scarab Z's - The Scarab Z's were a regular production car with an engine swap. This car has it's own uique custom built frame and body. More along the lines of the Bricklin or DeLorean maybe... FWIW, Carl B.
  8. Not quite - that is a picture from the 73 500. The photo was taken by the guys at TRACKSIDE Photo, and they loaned Peter their 5 gallon water jug, to help replace the coolant lost though a leak in the radiator. Later the hood was modified with stops repositioned - so it stops about 10 degrees sooner now. If it is in the way, the hood can be removed when you pull two quick release pins at the hinge.
  9. Carl Beck posted a post in a topic in Internet Finds
    Seems that someone got a very interesting piece of history - along with a very nice 240Z - all at a reasonable price. It it turns out to be in the condition as presented - should be a very happy new owner. FWIW, Carl B.
  10. There was a very nice TR-6 at the St. Petersburg Yacht Club Classic Car Show last month. It had been restored and was for sale - As I recall the asking price was $17,500.00. A 240Z in the same condition would easily bring that much or more - and sell faster around here. FWIW, Carl B.
  11. If a DATSUN 280Z is runing well - and you can drive it for 30 miles without incident - then you have a very good chance of driving it a couple thousand miles without incident. A couple of hand tools and minor spare parts onboard - and I'd take the chance.. A Jensen Healey Interceptor on the other hand - NO Way... Was the A/C compressor the only thing that caused an issure on the 280Z?.. Really the video seemed to be about fixing the Healey.. FWIW, Carl B.
  12. Carl Beck posted a post in a topic in Open Chit Chat
    Hi Jerry: Since you have to remove the center console - to install the vinyl shift boot. - I'd suggest you order a new mount for the choke lever. This mount allows you to mount the choke lever directly to the transmission tunnel - rather than having it screwed to the plastic center console. Not only is it much stronger - it makes taking the center console out and putting it back in FAR easier. EBay: Datsun 240Z 1972/73 Choke Cable Lever Mounting Bracket Item number: 281018241353 http://www.ebay.com/itm/Datsun-240Z-1972-73-Choke-Cable-Lever-Mounting-Bracket-/281018241353?pt=Motors_Car_Truck_Parts_Accessories&hash=item416dfe1149&vxp=mtr FWIW, Carl B.
  13. Because they are people that have never owned a DATSUN. Carl B.
  14. Really !! What was Don doing in Gainesville - he lives in Ocala, has a museum there as well. FWIW, Carl B.
  15. Carl Beck posted a post in a topic in Interior
    Sounds like a fun project - Does "set back" mean you plan to make the dash less thick/deep? To get better A/C in the car {bigger evaporators} - the Dash in the 280Z's was made deeper. Making the dash thinner wouldn't really give you more passenger/driver room - and it would make working on it later - just that much harder. I'd also want to make all the gauges/instruments and lights easy to remove/reinstall from the front of the dash. I'd also use all electric actuators... I'd love to fit the entire A/C & Heater System out of our Kia Soul {or any of a number of modern small cars} - into a 240Z. Before you build that custom Dash - maybe you can consider making it easily accomidate some other Factory A/C system. One that people could go to the junk yard and remove -to transplant easily and at relatively low cost. But that's just me.. Good luck with the project.. FWIW, Carl B.
  16. Ah..Good Thought... Carl B.
  17. Good point - I'll keep that in mind as I search for a container - that is long enough to fit them in, yet with a small enough total volume. FWIW, Carl B.
  18. Sold for $7500.00 - too cheap IMHO. If the car really had 49K miles and runs strong.. FWIW, Carl B.
  19. With the cost of living in California - I don't see how or why anyone would do it on the cheap. I had a set done by a person that specializes in that type of work here in Florida - Very Presentable but not "perfect" - they were $80.00 each. "Perfect" was $160.00 each. When they were done - his "Very Presentable" looked near perfect to me...heck, they weren't "perfect" when new. I have a couple of used sets that need to be refreshed - I think I'll try boiling them in Lemon Juice to see how they clean up. Now these are parts that should be economical to reproduce... especially in SEA.. FWIW, Carl B. The last NOS set that I saw on EBay went for about $110.00 each.
  20. Why not just buy a good set of used bumpers and have them rechromed or Show Chromed? That way they would be "correct" and not reproductions? Are the repro's really that much less expensive? FWIW, Carl B.
  21. Oops... never mind... Carl B.
  22. Carl Beck posted a post in a topic in Body & Paint
    With that amount of RUST where it is - one has to wonder what the inside of the frame rails look like, or what is under the tar mats on the floorboards, Wonder how much RUST is in the rear dog legs and rear wheel arches.... I've dismantled a lot of 240Z's and haven't seen rust like that, in that area on any of them. Hate to be pessimistic - - but the deeper you dig - you may find a lot more problems exist than you can afford to fix. College Student Budget. Start saving your money and buy a far better condition example to begin with. Sell that car to someone that has the metal working skills necessary to fix it ... Don't throw good money after bad.. Just my opinion.. FWIW, Carl B.
  23. Exact same thing happened to my last XJS - the wife was at a major intersection waiting on a Left Hand Turn Light - she saw a small amount of smoke come up from the cowl - the light turned green and she make the left hand turn - a few feet down the road the "smoke" turned to "Flames" and she pulled into a shopping mall parking lot - got out of the car. The Fire Dept. was located at that intersection - so they were there in a flash. Even so the fire totalled the XJ-S. I had it towed to the Jag. Dealer - the Service Manager there bought the car for a V8 Conversion.. The Jag Dealer appraised the car for the Insurance Company - - - so I got fair market value for it. Beautiful driving car with a wonderful V12..smooth... but I'd never own another..Electrical problems were constant.. ah not to mention the fire. FWIW, Carl B.
  24. I have the FIA 4 piston calipers with ventilated rotors on the BRE Baja Z. Yes, they are paired with larger diameter rear wheel cylinders. In short - IMHO - they are a huge upgrade over the stock system. The main difference between them and the OEM Brake set up - to me - is the drivers ability to modulate brake pedal pressure and the feedback in braking force. It is FAR easier to haul the Z down from any speed with a precise and desired speed/distance ratio reduction with the FIA set up. The brakes are smoother - more linear in application of braking force vs pedal movement. In the stock system - you seem to have very little braking force applied to the rotors at the top 1/4 or 1/3 pedal downward position... then the brakes come on more suddenly and fully at that bottom half the pedal pressure - where you have to really apply a lot of pedal pressure to get the clamping force you need at that point. The actual stopping distance might very well be the same between the two with an experienced driver - but the ease of making controlled speed reductions is far better with the FIA set-up. It is a large difference that one feels at once. To me - that feel and control are a major upgrade to the Z FWIW, Carl B.
  25. All of the above is great advice. I have a small Craftsman Canvas tool bag with a basic set of hand tools and some spare parts { a few feet of wire, spare fuses, ignition parts etc.}. In addition to a set of mechanics gloves and clean rags. I also carry a tube of hand cleaner. I also carry a small rug - it protects the original carpet and gives you something to lay on if you have to get under the car. A good high quality fire extinguisher for GAS/Electrical fires is a MUST as far as I'm concerned. Too many 280Z's are still running around with their original or 20+ year old rubber fuel lines. Which current blends of gasoline can destroy. {blow a fuel injector hose and you can have a fire in a heart beat}. In addition I carry a couple extra hose clamps - to clamp off a heater hose if one lets go. If you have mags on the car - make sure you have a set of STOCK lug nuts to mount the spare.. For sure I would have one or two extra fuel filters along - one tank of bad gas and leave you stranded with a clogged fuel filter. Most common things I've seen happen on longer trips to 70-78 Z's - These were cars that ran great for decades around town and on short trips - but the owners had left many things unattended because they never failed..until the stress of a long high speed trip was put on them. Blown Heater Hose Blown Radiator Hose Blown Fuses... headlight and high speed heater fan Failed Fuel Pump Or Clogged fuel filters Electronic Ignition Module - over heated and failed No stock lug nuts to mount the spare wheel/tire {I've given three sets away on the road - to other Z owners} As I recall the trip from Tucson into California is pretty much a very dry desert... I'd certainly have a lot of Gator-Aid and Water with me - in a cooler with lots of ice. A gallon or two of fresh water wouldn't hurt either. Stay hydrated and stay awake.. FWIW, Carl B.
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.