Carl Beck

NINE BUCKS!!! Nine Bucks??? How the hell can they make and ship something like that for NINE BUCKS? Maybe we should contact them and see if they can duplicate the OEM 5spd knobs for $90.00. Gee... Carl B.

Just flip the headlight switch ON/OFF several quick times. The contact points get a film of corrosion on them - and rapidly flipping the switch will usually clear some of it off - and the headlights will work. I'd also installed Dave's Headlight Relay System.... that way it only takes very low voltage to turn the headlights on/off... and saves the switch FWIW Carl B.

I can remember clearly when we received our first Lemon Green 240Z at Valley Datsun in Spokane, Washington. UCK...what the hell is that? We sent it back to the "Detail" shop and told them to do something with it. They DID. They threw a set of 14x 7 Appliance Wire Mags with 195R70x14 on it. The used Brown and Red over Bright Yellow pin stripping down the body line... Polished and buffed the paint to show quality. We put it on the showroom floor and called the next person on the waiting list... He originally wanted either Silver or Metallic Brown... He saw the Lemon Green 240Z on the showroom floor and changed his mind - that is perfect!! FWIW, Carl B

Hi Jeff - Yes, I know the car. It was originally sold here in Florida. Two or Three people that all worked at the same place had owned it one after the other. Our friend in Atlanta talked to all of them before he bought it. I located several of the 240Z's that wound up in his collection. Over the past 15 years or so - I've personally seen about 25 240Z's with less than 25K original miles on them. If they were driven and garage kept - they all had cleaner engines than the subject car being advertised. That Silver car was kept in a Car Port for more than 10 years before it was sold - but it has always been a beautiful example. Mileage is important but it is only one factor that goes into the value of the car - Condition is perhaps the Top Factor. Our friend in Florida, then our friend in Atlanta owned a White 72 with 16K original miles. I was there when it came off the truck from California. We went over that car for more than an hour trying to find one thing that wasn't perfect - couldn't find it. Engine Cad Plating everything still looked like the day it was on the showroom floor. As clean an undercarriage as the day it was produced.. 8K, 18K, 28K original miles doesn't matter - the condition of the engine in the Z that is the subject of the Thread knocks the car out of the Top Money category. Not to mention none of us have a clue what condition the fuel system is in etc etc. Just my opinion.. Carl B.

I think they can dream all they want - it cost them money to hold a car. No "Dealer" that I know of would pay more than $20K for that car in todays economy. If you really like the car tell Steve you are a buyer at $25K - and in the mean time you'll keep looking. It's the end of the month and nearing the end of the year - Christmas is comming and Winter is here - all this adds to VERY SLOW Sports Car Sales... In the mean time we'll keep looking for you... If the Dealer wants to be silly - let him keep the car for a few more months.. As long as you show a lot of interest - they won't DEAL.. FWIW, Carl B.

Oops...missed the latest updates.... Never Mind.... FWIW, Carl B.

Hi Mark: Thanks - very nice looking engine compartment, that looks like a super low mileage example. Of course if you to the original carbs back on - you'll have to install all the original fuel line wraps etc. The yellow dot on your fuel pump shows that it was returned to the Dealer for Fuel System modifications as well. Look at the Cad Plating on the parts on your engine and then look at the one Advertised. The amount of grime on each, the condition of the blue paint on the block etc. The staining and grime on the valve covers. I'd love to go inspect the Car Advertised... I still say that even given the super low mileage is correct - the car still needs a lot of elbow grease to bring it up to a standard that could command something above $20K in todays market. I do know a few Collectors that LOVE super low mileage near perfect examples - and they have paid silly money when they find the right car.. FWIW, Carl B.

Is it a complete, more or less Stock example? Is it used for pleasure only? Is it garage kept? Do you have another car insured as a Daily Driver? Good driving record? Over the age of 25 with no youthful drivers in the home? Is it presently insured with a Classic Car Insurance Comany or not? If it is indeed kept and owned as a Classic Car used for pleasure only - then yes it is under-insured. I'd have an Agreed Value policy on that of at least $12K today. That would assure that if it was damaged it would not be totalled for some minor repairs. Also prices on very clean 240Z's are going up again and they are getting harder to find. It won't be too long before a decend car will cost more than $10K and really nice one will be over $16k. If you have a regular insurance policy - you may have an "Actual Cash Value" or "Stated Value" Policy. In which case if it was damaged the insurance adjustor would say the car was actually worth $1500.00 - they would total it and settle for something close to $1500.00 {or run you around endlessly - until you settle}. If you have a Stated Value policy it is better - but still up to the adjustor to agree or disagree with the Stated Value. With an Agreed Value on an Classic Car Policy there is no adjustor.. they either fix the car spending up to the Agreed Value - or they send you a check for that Agreed Value and total the car. FWIW, Carl B.

QUOTE=mjr45;415659]My experience with Hagerty and other "specialty" insurer's always had this caveat that the car had to be "limited in driving to and from show's or events and not used for daily driving"" which makes the car a trailer/garage queen. Just my 2 cents. Not True - at least with Hagerty. There is no specified mileage limit and the only restriction is that the car can not be used as "transportation". Nor can it be used temporarily in place of your transportation vehicle if it is in the Shop. Automobile Insurance is sold State To State - and the General Insurance Companies/Carriers aka "Full Line Carriers" have certain legal restrictions/requirement etc specific to every State. They sell the broad line of insurance products - Auto, Home, Liability, Business etc. But there are things that they really can't handle effectively for any number of reasons. Classic Cars/Boats etc are one such category. That is where Speciality Insurers come in. Classic, Collector and Special Interest Automobiles are a small market and require specialized knowledge. The Speciality Insurers are limited by law to specific insurance products not commonly offered by the Full Line Carriers, but for which there is need. Cars that you use as daily drivers ie for transportation to/from work, for trips to the shopping mall etc etc must be insured by one of the Full Line Carriers in your State. Cars that you own for pleasure and which are not used as transportation - fall to the Speciality Insurers. The Speciality Insurers usually issue an insurance policy that has an "Agreed Value", where the Full Line Carriers usually issue policies that have "ACV" or "Stated Values". When you have a loss on a Classic Car there is a huge difference in how you deal with either. With the Policy that Hagerty issues - you can drive your Z for pleasure as much as you want. Drive it cross country to the next Z Car Convention etc. On average Classic Cars are driven less than 3000 miles per year - and the underwriters do watch that over a period of years you average something close to that - that is because miles of exposure on the highway equals "risk".. if everyone drove more the risk would go up and the premiums would too. I can drive my Z car to work to show it off every once in a while - that is pleasure use. But I can't use it to replace my transportation vehicle {it has to be fully operational sitting a home}. Always READ you policy - Agents will make off handed remarks that have no force in the policy. Before they issue a policy they may ask you how much you drive the car, what insurance company issues your Auto Insurance for the daily driver {you have to have one}, where the car is kept etc. and not everyone gives the right answers... On the up side - Classic Car Insurance is about 10% of what my daily drivers cost.. because the loss rate is very low for them. FWIW, Carl B.

Hi Dan: The one in Front has longer tail pipe than the one in back. The 73 Z's had rear bumpers that were moved out from the body. Seems odd that they would use a shorter tail pipe for 73. Can you tell us more about this? thanks, Carl B.

I do not believe that it is, and you have to wonder why a Z with only 8K miles needed a new muffler. My White 72 has 80K miles and the original exhaust system - header pipe through muffler. But as stated - you would have to see it in person. Additionally - the condition of the engine does not say "8K" miles either. A friends 72 engine with 16K original miles still looks show ready. On another thread - I spent several days visiting muffler shops - trying to find the best match to OEM. There are few that are very close. FWIW, Carl

Hi LeonV: To be fair - I did not quote the data as scientific evidence. I clearly labeled it as "relative data" - not ordinal. Road Test data from the auto magazines is all we have that reflects more or less common performance measures - 0-60, 1/4 mile etc. From your comments, I believe you understood my point - that being that an additional 200 lbs - the difference between the UK and NA cars - couldn't account for a 2 second difference 0-60. The Pounds per HP numbers also seem to fall in line with the differences in performance. I have about 10 RLS30 engine plates - but they all range only up to the 40,000 VIN range - they all say 162HP. I did not find a HP Rating in my 74 FSM. So I don't think there is an explanation needed for that. Rather a source or explanation is needed for the 139 HP rating given in the Road Tests. You also have to add the additional weight of the 260Z doors with Side Impact beams, the reinforced sub-frames and the additional heat/sound insulation. I've never weighed a 260Z door, but if I pick up an S30 door I can tell pretty quickly if it is from an early or late 240Z or a 260/280Z. I did not say emissions equipment. I attributed it to "configuring and tuning" our L26's to meet our emissions standards. The combustion chamber design, fixing fuel/air ratio's to meet the emission standards, and ignition timing. No I don't see anything, other than setting the engine up to meet the emissions standards. With 11 more HP - that should offset the additional weight of our 260Z's - - but then other than a loss of HP what else accounts for the significant drop in performance - stock for stock. FWIW, Carl B.

I have a NOS Ansa twin stack - the real thing not a reproduction. $425.00 plus shipping. RealEnth - run on up here to Clearwater, bring cash and you can save the shipping - and inspect the item before you buy. Bring your Z and I might buy you lunch... Drop me an E-mail at beck@becksystems.com and put 240Z or something in the Subject.. FWIW, Carl B.

Hi Jerry: I've always delt directly with Hagerty - never used an Agent. The appraiser is most likely correct - I said no less than $40K as that would pretty much assure the car would be repaired even if it sustained a lot of damage in an accident. Of course that wouldn't come close to replacing it if it were stolen or lost in a storm etc. The higher the insured value - the higher the premium too. I'll touch bases with some of the guys at Hagerty next week and hopefully remind them why the extended coverage to any 240Zs to begin with. Many time the Underwriters fear over-insuring cars during harder economic times - but a $32K top limit is just silly for a Collector Car Insurance Company to begin with.. Carl B.

I think you have more or less answered your own question. It is pretty easy to pick up 23 HP {162-139} if you bump up the compression ratio, set the ignition timing and distributor timing curve to a more performance oriented setting, and use carb's that allow more adjustability for air/fuel ratio's. Especially when the HP was there to begin with - and was "tuned out" or "traded-off" to meet our emissions standards. Years ago - when the Nissan Competition Parts Dept. was in existance for example - you could order "Euro Spec." pistons. They had a 2cc platform on top of the flat top pistons - which in effect reduced combustion chamber volume by 2cc's. So ... Scrap your 74 E88 head {47.8 cc combustion chambers} - and replace it with a 71/72 E88 {44.7cc combustion chamber}or better a 75 N42 head {it comes with the larger valves}. Add the larger intake/exhaust valves from the 75/77 280Z's to the E88. Use the Euro Spec. pistons. That will raise your compression ratio from 8.8 to 9.5. Use a 71/72 distributor and you'll have a good advance curve to start with, or have your 260Z distributor re-worked to get a good advance curve. Add a mild cam and dump the Air Injection and other emissions gear.. and you'll easily pick up 25 to 30 HP. If you can't find a set of the Euro Spec. pistons you can just mill the 71/72 E88 head to reduce combustion chamber volume. Of course you have to have a good valve job, the valves need to be unshrouded and with hardened seats - etc. etc All of this has to be on top of a good long block {good rings, bearings etc}. Have all the parts on hand, the head back from the machine shop and a good set of S.U.s - and a day in the garage you can bolt everything on.. After that you can work on Weight Reduction.. FWIW, Carl B.

Hi LeonV: If you look at the Road Tests from the time {relative data at best} - Pounds per HP and 0-60 times - it seems quite possible that the North America L26, tuned to meet our Emissions Standards for 74 - lost 26 HP. On top of that our Fat Bumpers and other "safety" equipment added about 200 lbs to our 260Z vs the UK model. Any way I look at it - 2 seconds 0-60 mph is a pretty great seat of the pants difference. A Snap Shot from some of the Magazine Road Tests of the time: 1970 240Z 150 HP - Curb Weight 2355 lbs - Pounds per HP 15.7 0-60 mph 8.2 sec. 1/4 mile 15.5 sec. at 87mph 1974 260Z {North America} 139 HP - Curb Weight 2665 lbs - Pounds per HP 19.2 0-60 mph 10.3 sec. 1/4 mile 17.9 sec. at 79 mph 1974 260Z {UK} 162 HP - Curb Weight 2425 lbs - Pounds per HP 15 0-60 mph 8.2 As one can see the UK model for example had the performance of our 240Z's.. Adding 200 lbs doesn't add 2 seconds 0-60 - so there had to be a significant HP loss as well. That HP loss was attributable to configuring and tuning our L26 engines to meet our Emissions Standards. Look at the difference between Euro Spec 74 Porsche 911's and US Spec. 911's and you will see pretty much the same story. In the early days of meeting our Emissions standards it cost significant HP here. I do agree that once the technology caught up with Emissions standards - they resulted in far better performing engines.. but that would be years after 1974. Also - I believe that there is a difference between a car being "undesirable", and a car being "less desirable" than an earlier model. I don't believe that the 260Z's are considered undesirable here. I think it is easy to understand why the US 260Z is less desirable than the lighter, faster 240Z's. Nonetheless, clean original early 260Z's are still very desirable. It does however COST MONEY to swap out the bumpers and Carbs, re-curve the distributors etc etc ... So that cost comes off the initial price of the car - so Yes the 260Z's here sell for less to start with.. Nonetheless as you point out they also offer several improvements over the 240Z's.. FWIW, Carl B.

What does "KURO" mean, stand for, represent... :-) I hate to miss something... So is it snowing there yet? Carl B.

The pictured Z would not meet the criteria to be classified as a #2 Condition example. The engine is rough - and it would have to pulled and fully restored - all bright and shiny etc. One would have to see the actual condition of the paint and the undercarriage as well. In todays market - nice as it seems to be - it would take a lot of time and effort in addition to several thousand dollars to bring it up to a condition that would command anything over $20K. Serious Collectors will spend the money for Perfection - but they won't buy a Project and screw around with it. That leaves the subject car to the Enthusiast Market - and right now most Enthusiasts are very conservative with their spending. {I know one offer of $45K has been made for a near perfect 72 Surivor in true #2 Condition - and that hasn't been accepted yet that I know of} A super low mileage survivor will command a premium even today - but it has to be "Show Ready" with documented mileage etc. to bring over $25K today. I know it is sad... the 73 I finished last year - the original owner had a little over $65K in. But he, like you and other original owners restore their Z's because they have had and loved them for over 40 years.. and they figure they are spending the money on themselves. FWIW, Carl B.

Hi Jerry: WHAT? When did that happen? Do you recall who at the Hagerty told you that? Before the Financial Melt down - I know at least 5 serious Collectors that were buying #1 and #2 Condition 240Z - and with a few pictures E-Mailed to hagerty they were insured above $50K with no problem.{no outside appraisal etc} I worked with Hagerty originally - to get our Original Owner 240Z's insured with Classic Car Policies, with high enough Agreed Values to assure the cars would be repaired rather than totalled in case of a serious accident - most of the 175 Original Owners on our Register carried at least $20K. Your Z right now should be insured for at least, at the very least for $50K. That certainly would not replace it - but at least that would assure it would be repaired if anything did happen to it. $32,500 would not begin to buy a true #1 or #2 Condition 240Z. FWIW, Carl B.

Hi Mark - So your Z has about 8,000 original miles - Wow. Can you Post some Pictures of your Engine Compartment for us. Nothing really to consider - The 73 Model Year Datsun 240Z's sold here in North America started production in 8/72 and ended 8/73. The VINS started with HLS30-120001 FWIW, Carl B.

We had the "Oil Embargo" aka Fuel Shortages at the end of 73 and that put a real damper on the US economy - which was already slow. AIR - when I moved here to Florida in 73 the unemployment rate was over 14% and Mortage Rates were around 12%. Add the effects of the ever stricter Emissions Standards that robbed performance and Sports Car sales were at a snails pace. FWIW, Carl B.

I doubt he'll find any - Unless his definition of a "good deal" - is paying a lot up front for a very good car. Which as most of us know is usually the best deal one can get. If his definition of a "good deal" is a Datsun that is low priced [cheap}, looks good, runs good and could be driven daily for a few weeks here - -- he won't find one. When cars like that come up - they are bought within hours if not days of listing. But it never hurts to try.. FWIW, Carl B.

Hi Jerry: The only thing I can think of - is that it must not be a 4spd. from a 72 240Z. Thus the longer extension from the pivot point is moving the shift forks too far and they are hanging up on the gear clustor. j Good to hear that you have solved the issue. Carl B.

The last door seals I purchased last year - were the two last one's in the Country for a 73 240Z. Courtesy had one and a Dealer in California had the other. As I recall they were around $500.00 total, plus shipping. That was for Seals with the new Pinch Welting attached. You are lucky if any for the 260Z's are actually still available. At this point $500.00 for both of them seems reasonable to me.. The last OEM NOS rear window Seal I had installed - split from age within a year. Now it has to be replaced again.. FWIW, Carl B.

There is a difference between "cheap" and "inexpensive". China today is quite capable of building the finest products in the world. The only question is - what does the Customer want to buy. You really won't know if the pliers Toolway Industries purchased in China, are actually cheap or just inexpensive - until you have put them to the use you intended. If they hold up well and do the job you need done - they are just inexpensive. If they fail your use - they were cheap. Likewise "cheap" steel from Canada is still "cheap" steel. All depends on what the Customer wishes to buy - and in turn what their Customers are willing to pay. Let us know next year which they turned out to be.. FWIW, Carl B Yes, My Apple Mac Pro, iMac untra-light, iMac Portable, iPad and iPod were all made in China... wonderful products!