Jump to content
Welcome Guest! Please read more information about our club!

Johnny wick

Member
 View Profile  See their activity

  • Posts

    2,204

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Johnny wick

  1. Johnny wick
    Just did the plumbing 2 days ago replacing the in and out 5/16 hoses and clamps with Gates branded fuel hoses. I have attached pics for reference. While i was there i was thinking if it was also worth replacing the complete electric pump harness that comes from under the fuse box. Is it really worth the effort?
  2. Johnny wick
    Is this the best and most resistent fuel hose Brand? Any other options?
  3. Johnny wick
    I need the full list of hoses. I could only manage to take pictures of some of them.
  4. Johnny wick
    I refer specifically to this one that is breaking and is installed to the input of the airtex 8012s elecric fuel pump before the filter as shown. Asides from this i will need a list of each and every fuel hose for the complete 1972 240z. I am travelling to miami and would like to source locally.
  5. Johnny wick
    Can you confirm the precise diameter for this hose is 5/16"?
  6. Johnny wick
    this is not a fuel hose! I should replace all of these hoses in my car. Anyone has a list of the hoses, diameter and sizes for 1972 240z
  7. Johnny wick
    Looking for 5/16 or .31 inch fuel tank to electric pump. Will this work?
  8. Johnny wick
    Would you use other type of clamps instead of these ones to avoid any hose cracking?
  9. Johnny wick
    Which type of clamps? Any pictures?
  10. Johnny wick
    I have a spare hose and two clamps. Will this suffice?
  11. Johnny wick
    I recently noticed the gas hose that goes from the tank to the fuel pump rated 0.31 inch is beginning to crack. Should i consider replacing the hose and using other type of clamps to avoid this happening again?
  12. Johnny wick
    okay. Ill try this!
  13. Johnny wick
    I refer to removing the hose, cutting and reattaching it without spilling all the fuel on my hands. My tank is half full.
  14. Johnny wick
    Last time i removed that hose it was a complete disaster and spill of gas all over. Do i really need to cut it and tighten again?
  15. Johnny wick
    What about 3 in 1 blue bottle? I have a couple.of those bottles.
  16. Johnny wick
    ATF!!!
  17. Johnny wick
    I would also like faster response when i launch from 1st gear at stop lights. Car lacks some response when accelerating from stops.
  18. Johnny wick
    Which one? Would you use crazy glue to fix the cracks?
  19. Johnny wick
    Very bad design
  20. Johnny wick
    Yes it did!
  21. Johnny wick
    Wondering if i can fix this small crack without pulling it from the chassis. Anyone?
  22. Johnny wick
    Im tired of seeing the horn button fall from the wheel. Any solution for this other than buying a new one?
  23. Johnny wick
    You are right. I did checked on one of the hoses clamped to the airtex 8012s electric fuel pump and even though its not dripping any fuel its a little bit worn. Should i worry about this?
  24. Johnny wick
    Does the fact that my engine is refurbished to 2.6 liter with oversized pistons matters?
  25. Johnny wick
    Why do you have to do all these lab tests and analysis. Isnt it simpler to stick the float sync tubes to the drain plug and measure 23 mm from the lid?
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.