gwri8
-
Posts
1,385 -
Joined
-
Last visited
-
Days Won
22
Content Type
Profiles
Knowledge Base
Zcar Wiki
Forums
Gallery
Events
Downloads
Store
Blogs
Collections
Classifieds
Everything posted by gwri8
-
Fast Idle Actuator, Compressor, mount and Idler Pulley
gwri8 replied to Hunter280z's topic in Wanted
I've got most of the things like magnet valves, idler pulley, mount and probably a Fast Idle Actuator a plus a few others but not a compressor. I'm headed out the door to the dentist right now but I can check when I get back. -
I'm not familiar with that pump. What is it's pressure rating and why did you bypass the fuel dampener?
-
What are you scraping with Mark? I found that using a long handled razor blade scrapper worked best when I did mine.
-
There are full dash covers available for the 240Z like this one https://zcardepot.com/catalog/product/view/id/825/s/dash-cover-cap-full-overlay-interior-black-70-72-early-73.html/?gclid=Cj0KCQjwguDeBRDCARIsAGxuU8YfUynjMimWLobvU8IIPj9Ag2iznsa4ZZPGatC3DKft3aEHo0_xpHEaAqigEALw_wcB , but you would need to source a Glove Box and Glove Box door. I believe the box is still availabel but the door probably from eBay.
-
How did the sway bar give way? Was it already loose or how was it damaged?
-
Ms. Zup, Zup, with CaptO and wal280z behind them.
gwri8 commented on gwri8's gallery image in 2018 Zcon Atlanta
While not forgetting Zup and family, apparently Wayne @wal280z grew a Mullet while in ATL..... -
Jim 2 is @S30Driver
-
You can download a 240 FSM here. http://www.xenonzcar.com/s30/fsm.html That will be your new bible for the car.
-
Hence the request for more pictures of your AC. Under the dash, console controls and other side of the firewall to start. That will show more info than trying to explain everything. The folks on this forum are sharp and can pick out details that could solve your AC questions quickly.
-
You're going to have to show pictures to clarify your car's situation, especially with the AC. But typically with the stock version of the heater, you simply slide your controls to heat and hot and of course turn on the blower fan. Hot air should only come out of the heater vents or the defrost, whichever is selected, not the center or side. That is unless you have some other aftermarket kind and I am not familiar with any of those. Someone with more V8 and 72' experience will probably chime in soon. Good luck!
-
-
Patcon, Matsuo San, Zup and Mark Maras at Peoples Choice Show
gwri8 posted a gallery image in 2018 Zcon Atlanta
-
-
-
-
-
S30 Driver, Capt Obvious and Mark Maras at Zups car
gwri8 posted a gallery image in 2018 Zcon Atlanta
-
Well, I had to leave ZCon a wee bit early for technical reasons and didn't get many pics, but I know all the cool kids were heading to the closing banquet that SteveJ was putting together. When I left, Zup already had one trophy from the Peoples Choice show on Saturday. It was great meet and hang out with this group of folks. Well done SteveJ! Thanks for the hard work!
-
Only grade 10? ?
-
I'll be coming in tomorrow early afternoon. I filled up with a bad tank of gas earlier today and hope I can work it out before I leave. Where are all the CZCC hanging out?
-
I know it's not Saturday nite, but....
-
Installed new Gates belts (fan and AC) and cleaned up around the alternator + replaced the AC pulley bearing even though my AC does not function yet. Glad I checked before I drive to Atlanta. Now to chase down intermittent headlights.....
-
Add me to the welcome committee. Looks like you've got a good start!
