bigd652

Well then if i need to remove the gas tank thats fine. If somebody out there could please tell me how to get it out as easy as possible. And any tips. Thanks Derick

Oh yes its a new filter as well. If i where to change the lines what would I need to use for new lines? Derick

OK here is the back story.... I drove the car for a full summer about 4 years ago. Since then the car has sat with about a 1/4 tank of gas. Last summer i started to tinker with it again. The car which is a 76 280Z 2+2 would run when still but when in motion after a few miles or alittle longer would just out of no where start to spit a sputter and die. If I would let the car sit for alittle bit it would start back up again and go another 5-10 miles and do it again. Plugs and cap and rotor have been changed along with the coil. The car sat again until this spring. Now I will get this thing running good again. Last year I did fill up the tank with gas but after it sat again for a year I pumped out as much of the gas as I could. Now I'm thinking the bad running is due to crap in the tank getting sucked up so I would like to drop the tank. Is there a drain plug on the tank and how hard of a job is it to take the tank off? Any other thoughts on why it would sputter out when in motion and not when it idles would be great. Sorry this is so long. Any other questions for me please ask and I will reply. Thanks for your time. Derick

Can they be cleaned? or just replaced......

The bumper pad just pulls off?

Do you have a pic of the rims? If you still have them?

How do you get the steerig wheel off? Never done this before. Thanks

Just wondering if anyone out there has one of these inner covers for my 2+2. Please see pic so you know what I'm talking about. Its the black inner part. Thanks

Damn thats a bad one.... Can I have his valve cover? Just a j/k

Whats is the spark plug # for NGK plugs for my Z. 76 280z 2+2 Thanks

Yup... Use a breaker bar..

I'm just looking for other options. I'm gonna try and fix my bumpers but if they can't be fixed then I will need new.

I to would like to know.... Any thoughts?

I'm going to start restoring my Z soon. I would like to replace the bumpers but man are they $$$..... Can bumpers from earlier years be put on with out major mods?

My clutch in my z needs some help. When I got the car out of storage the clutch fluid was like sludge. I cleaned out the master cylender the best I could but when I press the clutch and hold in down its loosing pressure. So I think I will just replace that hose and clean out the system. My question is how hard is it to replace that hose and bleed the clutch?