Zwizzzard

Our team runs the Pirelli World Challenge schedule. Just got back from COTA in texas this week. I drive the race car hauler. I work for GT sport racing. We are looking at getting a vintage car though. That would get us to some different venues.

maybe in April? I'm out of town on Monday till the end of the month. Grand Prix of St. Petersburg

possibly, going to have one more crack at it tomorrow. What your Saturday afternoon looking like?

can't check continuity to fuse block because ac fuse has no power coming out. It is not hot in the fuse block.Plug on switch looks really good. Just no power in the heater harness.there is a red line that connects to the blue line in the dash with an inline fuse. guessing that is where the power is supposed to come from? It's dead too..

Putting the 71 heater stuff back in the car. Added a new modern fuse block to eliminate some power woes. With the new block in and hooked up, the a/c fuse has no power with the key off or on. Is this the same circuit that runs the heater controls? Bench tested the blower motor but with the harness in the car I can't turn on the blower motor. All the heater stuff was bypassed when I bought the car so i'm kind of working from scratch. Any idea's?

Have a 71 with a 4bbl carb intake on it. brake booster vacuum line is not plugged in so no power brakes. Have 6 open holes on intake but can't find a good vacuum port. No balance tube on intake but holes are there and open on both sides. Car runs good but the lack of vacuum is puzzling. Other than switching to a factory SU setup where can I pull vacuum from?

1.77 blue ridge Ga.

i"ll have to check which carb is on there. Actually runs pretty good with it on there.

It doesn't fit. I'll post photos later.

thanks for the comments. Haven't been able to do much till the car comes in on saturday. Gotta get the parts car off the trailer first. haha I thought the 4 bbl setup would be worth some money and i could sell it off to buy more parts, oh well..Have a set of factory carbs on the parts that will probably go in. A lot to do on this one.. ANYONE NEED A FUEL CELL? EEKS!

Already have the dawsonville car at the shop. I'm in Blairsville, have lots of time and patience, never enough money but can do most of the work myself. Big shop to work in. Not planning on going crazy on this one. Good driver and nothing more

Pick up the car Saturday. Car runs well with it, but hood clearance issues. Maybe a cold air intake? Have to pull the plugs and see what's up. Pics to follow

picking up a 71 240z on Saturday that has a 4 bbl intake manifold on it. Anyone know much about them? This car has been hacked up. Going to make it a respectable driver, parts car already acquired! Not my first Z build, did an rb25 swap in a 240 for a guy a year ago. This one is mine though