sweatybetty

which way is your m bar?

well i flipped the m bar around but then realized that i need to install the parking brake cables first. So, i havent tried installing the diff again. I found a good cable that i pick up this am. will try the diff again this afternoon thanks all for the help

that is how mine is

it is a 180. i have the fsm but he pics there arent really clear enough. none that i could find anyhow.

ive turned that mount 3 times now. about to drive me nuts

what is backwards here? if i put the front mount on 1 way its too far from the m bar, if i put it on the other way, its too close. do i have the m bar on backwards?

out of curiosity, what is so special about those washers?

thanks

what kind of switch is there for the heaters? is it factory? everything looks sweet

most parts stores can do a battery load test also

well, i ordered the new parts like what was on there and was hoping they would be here today. apparently the seller didnt ship them yet because he thought i didnt order everything i needed. kind of po'ed about that.

when i was bending mine, i used a large socket to wrap the line around. it helps to stop kinking.

another question. what keeps the rod centered in the hole in the frame? is the factory rubber molded to do this? or is there something that i am missing? i would think you wouldnt want the rod sliding around in that hole. thanks all

are those wheels worth much? i have a set that are 14x6 that i am not going to use. sorry for the hi jack

thank you both

so, i have the front suspension torn out and almost ready for paint. when i removed the compression rods, this is what i found the new bushings from energy suspension look like this my question for those of you who have replaced these parts is this. what kind of washer did you put on the rod between the new bushing and the rubber boot? will too thick of a washer throw the alignment out of whack enough to make a difference? thanks all sb

nice car! it looks like its running a bit on the rich side

go here http://www.classiczcars.com/forum/61-open-s30-z-discussions/ 1st topic is 72 fsm click on that 2nd post is ra rear axle and suspension click and download that it is there

i just did mine yesterday. this is what i used. www.classiczcars.com/applications/core/interface/file/attachment.php?id=65642

sounds like the shorter one may have broken

yes it is. PPG Delfleet Essential ESU462 4.6 Epoxy Primer

that is the epoxy i used on the body. fairly tough paint.

try some regular dish soap

little more progress. new proportioning valve all the rear suspension parts sandblasted and painted and installed drums sandblasted and powder-coated

no reserve?