Jump to content
Welcome Guest! Please read more information about our club!

sweatybetty

Member
 View Profile  See their activity

  • Posts

    1,119

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by sweatybetty

  1. sweatybetty
    you say that now.
  2. sweatybetty
    first off, i would like to thank you all for the help. the problem is solved!!!!!!!!! it turns out the plugs i put in (NGK BPR6EGP) are designed for a high energy ignition. they have a very fine pointed center wire. basically, the pertronix and flame thrower dont put out enough energy to fire these plugs consistently. i switched to the NGK BPR6ES-11, and i have fire in every hole and the back fire is gone. something so simple............
  3. sweatybetty
    you have an adventure ahead of you.
  4. sweatybetty
    there is nothing to set. pertronix ignition and factory tach.
  5. sweatybetty
    quick question. what holds the kick panels on? im using the msa panels with the speakers. and, do they go in after the carpet? sorry for all the questions, but my car was totally gutted inside so i am not familiar with the details. thanks all sb
  6. sweatybetty
    im thinking along those lines also. ill try the ground wire.
  7. sweatybetty
    the distributor feels tight, no wobble that i can feel. im running pertronix ignition, so no points. i have turned the magnets several times with no difference
  8. sweatybetty
    the car is running now. i have put my timing light on every wire, and the light will work on all but # 1 & 3. i have switched wires around but no difference. new cap and rotor, no difference. i tried pulling #1 wire off the plug, and get a great spark to ground. im going to try new plugs tomorrow, any recommendations? thanks all sb
  9. sweatybetty
    added a little "punch" yesterday. this is just the fitting and testing since i dont have carpet yet. sounds good so far, but i think it will sound even better with the entire interior in
  10. sweatybetty
    Granny, i test-fit a couple of them and they seem to fit well. i think i need the carpet kit in before installing the plastic. i will post as i get everything installed.
  11. sweatybetty
    not much going on, waiting on parts. got the rear glass tinted and installed, along with the stainless trim and rear spoiler. the spoiler was a bit of a challenge. the side that contacts the deck is not flat, so with only 2 mounting bolts, it would rock back and forth. i solved that by applying a few dime sized spots of body seam-sealer and actually glued the spoiler to the hatch. no movement at all now, and any water can flow out under the spoiler and hatch ordered a carpet kit from z specialties, and have a few more items coming from msa, then i should have everything for the interior. also got the speakers and amp from crutchfield yesterday. life is good i also found a distributor cap with brass terminals at napa
  12. sweatybetty
    +1!!! same here. mine is very close, but i still plan on taking it to a shop and having them do the final adjustments
  13. sweatybetty
    i have narrowed my problem down to 2 cylinders mis-firing which Zed led me to.
  14. sweatybetty
    i finally got it where it is supposed to be, and it fired right up. line up the marks as shown, turn the shaft a little clockwise?, then push it up in there. tighten one bolt finger tight and the take a look. it may take a few tries (you will be an expert shortly) but it will eventually go. very aggravating
  15. sweatybetty
    my 2 cents is the foam tapes will hold water. i would use rubber. i have used bicycle tire inner tubes for things like this, cheap and you can cut it to fit
  16. sweatybetty
    i agree. the muffler should tuck up in there so nice you cant see it from the rear of the car
  17. sweatybetty
    why would the choke light hook up to the seatbelt? think about it
  18. sweatybetty
    thank you, it has been a long road, but the end is close
  19. sweatybetty
    today i ordered 2 caps and 2 rotors from napa, that are supposed to have the brass terminals. we shall see. update to follow...........
  20. sweatybetty
    rear glass tinted and installed. now i can move on to the interior since i can keep the dust out now with all the glass in. bunch of goodies from msa should be here tomorrow
  21. sweatybetty
    is there a left and a right?
  22. sweatybetty
    thats what the shipping label on the box says
  23. sweatybetty
    from pakistan with love. ordered these seat covers from interior innovations last sunday. showed up today. my first impression is very good, but i will follow up when i get them installed. it is amazing to me that i can order a part, it gets delivered to my door from halfway around the world, nice quality, but it takes twice as long to get something from somewhere i can drive to in a day.
  24. sweatybetty
    to follow up. the "baby doll" is now idling good with the timing at +/- 13* the popping is now intermittent, which i think is from mis-fire on # 1 & 3 plugs. putting the timing light on one wire at a time shows a consistent spark on all but those 2. that narrows it down to cap, rotor and wires. i have a new set of wires, so i think it has to be the cap and/or rotor i would like to thank all of you for the advice and help.
  25. sweatybetty
    i have moved up to frustrated!! Mike, i re-positioned the shaft and the pig fired up! i did that a few times with no success, but for some reason it worked this time. Zed, i found that #1 & #3 are hit and miss. i put my timing light on each wire and those two would not trigger the timing light. i think the next step is another new cap and rotor. does nissan still sell them? or is there a good aftermarket brand? napa maybe? thanks to you all
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.