Everything posted by 240Z73
-
We're bringin' back the Flat Tops!
Oops, I mean I'm not 100% sure about the correct color being gold.
-
We're bringin' back the Flat Tops!
-
We're bringin' back the Flat Tops!
Thanks for the information Rich. I'm going to look into having some exact 1973 decals made. As long as they have an adhesive backing, installing them would be very similar to installing window film. Use a mild soapy solution, once positioned where you want it, use a firm rubber squeegee and there should be no bubbles (as long as you cleaned the lint and dust off).?
-
We're bringin' back the Flat Tops!
Was the material similar to a sticker with a self adhesive backing?
-
We're bringin' back the Flat Tops!
Rich where did you get the Tune-Up Emissions decal on the hood, 1973?
-
We're bringin' back the Flat Tops!
Out of curiosity, what are the 4 screws on top of the black painted radiator support used for?
-
We're bringin' back the Flat Tops!
You may want to try Z Car Source of Arizona. At the time about 3 years ago, only the left was available new. I had to re-drill a few holes and flip it to the other side, the end has a slight taper.
-
We're bringin' back the Flat Tops!
My antenna does not go all the way down, is this one for an early 69 Z? If so, I'll trade anyone for one that does.
-
We're bringin' back the Flat Tops!
Looks like I don't have that piece, sorry.
-
We're bringin' back the Flat Tops!
Nice to see carpet under the seat! Looks nicer than what I did. ?
-
We're bringin' back the Flat Tops!
@jayhawk, thanks for all the information! I’ll email privately.
-
We're bringin' back the Flat Tops!
If you're around come by, I would love to meet you!
-
We're bringin' back the Flat Tops!
San Marino sounds like a very nice show! I'm going to try and make Huntington Beach the week before. This will be the first show I have ever done!
-
We're bringin' back the Flat Tops!
An absolute beautiful job. Rich are you and Bob planning on taking the car to any Concours shows in CA? I won't have a chance if you do!?
-
We're bringin' back the Flat Tops!
Rich you are doing a fantastic job! I sure wish I restored my Z AFTER I found this site! The hardest thing I had was trying to get the correct bolts, nuts or washers after I stripped or broke several trying to get them out. Also finding the correct size fuel lines using the original clamps is no easy chore. I sure wish I knew where you get some of these!
-
We're bringin' back the Flat Tops!
I just met the owner of this car (very nice guy!) and would like to meet and talk to Motorman7 one of these days! I just finished a full restoration on my 73! Keep up the good work!