240260280

Hi All, What supplier has the best value for a full S30 rubber set? Thanks

It is connected to +coil in your photo. It is the other end that is not connected which is wrong. It should connect to ground. Your car seems to have a dual lead condenser. FYI Usually the Nissan condensers have just one single lead and the body is ground (see lower photo for typical 280z condenser).

I think that is not correct condenser. Usually only one lead and the body is grounded.

~ 1 month out.

Failing Ignition module can spontaneously cause loss of ignition (look at tach to see if it drops instantly when coasting). Usually they start working again after the circuit cools down. Failing capacitors (condensers) can short out their connected ends when failing. Usually they start working again after the circuit cools down.

It seems to be the way to go for Mig + Aluminum.

Rats. Too short for me to look. Sorry ?

Are you in a rush? I think there are lots of 510 parts in our Z barn.

Torque!

I guess there are plugs on each side or is the underside a drain?

btw: This is the perfect screwdriver tip for Webers, etc!

^ ^ ^ ^ Above post @bartsscooterservice, @EuroDat

Sorry, I assumed too much. Please review this then get back to us. http://240260280.com/Tech/Carbs/Weber/DCOE Theory Operation and Tuning.html

There are two possibilities: 1. Poor sealing resulting in loss of vacuum at head of fuel to lift it up into the passage to the aux venturi. 2. Clogged main jets or jet too small.

The jig's up!

First A/T in USA arrived in Oct. 1969 ?

Here is an online photo:

Nope. I know drain holes. These are hole holes. Each passes through a sub member as well. I'll get a picture the next time I'm at my buddy's.

@Dr. 240Z

My buddy's 73 has two holes that go through the floor back near the outside seat belt anchors. Is this a "feature"?

Could make a great Dilbert comic.

The one with the black valve cover could be interesting as whoever painted it may have done more... possibly in a good way or in a bad way.

Luv this: https://www.youtube.com/watch?v=-M37lnkkvSw

OK CO, you went on a bender... yuk yuk.