7tooZ

I’ve had this a long time and when I am in the garage it is the most convenient. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Decided to get my horn to work. I have a set of new Hella horns and have found the three green wires. Can someone verify this is the correct relay? Which wires go to which terminals? Green Green/red Green/ bulk

Has anyone done any research or worked with this product? http://autoacsolutions.com/products/ac-kits/1970-1971-1972-1973-datsun-240z-air-conditioning-heater-defrost-complete-add-on-kit/ 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Started her up today after new rebuilt head (thanks[mention=6833]MadKaw[/mention]), timing chain,water pump, etc Then shared a car wash with our 18 mo old granddaughter. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

I have never seen material that looks Like that on the many early cars I have worked I on. My first 71 the outer shift boot was vinyl and did have a off white netting attached on the back side. You can purchase both vinyl or leather reproductions. Attaching it is pretty straight forward. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

That is correct. Do you have them. I probably have some extras. The innerboot is not screwed to console until the series II console. Post a picture of the console to get confirmation 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Jon Welcome to classic Z car. If you have a rust free or repaired and painted you have the most important part of getting it road worthy. There are numerous experts here and some are RHD experts. If you are wishing to get it drivable and are a DIY person you should be able to without robbing your wallet. Best thing you can do is start the build thread which you have done. Sit down and outline your goal and your experience level. There are several threads already and we can point you to them your review. Then post your questions to this thread. Be sure to provide information such as 73 RHD, or 19Xx 280z, 5 speed, SUs carb, etc. you will get quick reply’s round really experienced followers. Where are you located. Ps Want to sell it.? 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

“new old stock” 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Here is a Craig’s list post for some interesting early parts. They are about 50 miles from me. https://skagit.craigslist.org/pts/6826801481.html 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

I have been watching these for sometime now. Are they designed to stay on full time? Photos don’t show fuel in the tube? I can’t tell if if they are calibrated? 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Thx 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

The description says it is “Specifically designed for the lubrication and service of model year 2007 and newer manual transmissions and transfer cases Product already contains a limited slip friction modifier No need to use a top treat additive” How about this one. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

I am going to give them a try. Have them on order 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Is this what you are recommending 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Sorry I should have been more specific about what I am doing. I Have the car on jack stands to replace the speedometer drive gear from a blue (3.70 gear) to the white for a 3.90 gear set. I drained the gear lube to check for any signs that something is wrong. I purchased this transmission 1000 miles ago. I found no signs of unusual wear in the oil or the magnet. I have been using MT90 in my transmissions for 15 yrs. and was surprised when I couldn’t find any on the self atOriellys, AutoZone or NAPA. Amazon has it but have to wait. Thought I would see if others have better ideas. Just need a good gear oil. $32 doesn’t seem expensive. @Zup always has good advice. Anybody else want to weight in? 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Having trouble locating Redline MT90 for my 83ZX 5 speed. What else might work?

Are these the ones you ordered NEEDLE (SB) $12.50 Product Code: AUD1318 **Please choose your metering needle carefully as they are non-returnable. All sales are final**

@patcon what method do you use to twist the door? 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

I use Michelin Premier. Pretty happy after about 1000 miles. Car sits on Tokico lowering springs (1.25” on this car”). 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

I got caught up watching the angle of the key flow. Had to watch a second time breathing hard by the time he was done. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

@siteunseen help me under why it so important on a stock engine that maybe more than 20 years old. I use a timing light with a dial back and it seems impossible to tell a difference of 2 or 3 degrees Unless it’s a highly tuned motor there so many other things that vary how well it runs. How many timing degrees might there be between when when the piston reaches the high point and when it starts to move down. Just curious. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

In our state WAshington it could have titled as either depending on the date of sale. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Okay so do you know if you have compression pull the plugs and run a compression check or just put you finger in the plug hole. Could the valves be bent or frozen in place. Compression will tell you. Check the oil in the carb and lift the piston let it drop. Compression spark and fuel is all that needed except the timing could be way off???? 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

@SteveJ hey I told both plug I took out and the sensor adapter to my local small hardware store and the Plummer guy gave an adapter that worked. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

Great idea. I have been doing that for years. ZCCW member get a discount from our sponsor. I find the parts numbers, replacement number and go to the parts counter. Their system can verify the parts if you give them the numbers, but they don’t seem to be able to look up numbers for early cars. 72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.