7tooZ
-
Posts
1,038 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Knowledge Base
Zcar Wiki
Forums
Gallery
Events
Downloads
Store
Blogs
Collections
Classifieds
Everything posted by 7tooZ
-
I like it but I would probably vote for a spare stroker motor and a really nice stock motor on a display. stand. Can't lose either way. Don's iPhone using Classic Zcar Club mobile
-
Update Feb 2017 It's running driving car. AC holding charge. Updated tach shows 10 grand and gauges converted. Cayman seats are in but still need power hooked up. Whitehead R200 with 4:11. Glass is next and then off to upholstery. l Don's iPhone using Classic Zcar Club mobile
-
Red wine is really why I love Europe. A liter of table wine for the price of a coke here. Don's iPhone using Classic Zcar Club mobile
-
Yes it is. Test fitting an AC compressor for the addition of AC to 240's with different headers and best way if routing the refrigerant lines away from the header. Your day must about over? Did the Loire valley chateaux and Paris in 2015 and need to go back. Paris is a perfect add on/stop over on our Eastern Europe plans later this year. Don's iPhone using Classic Zcar Club mobile
-
Did a test fit this morning of the header. Fit is excellent and no problems dropping in place. Don's iPhone using Classic Zcar Club mobile
-
Series-1 Hatch Vent Duct Clips & Restoration Info Needed
7tooZ replied to Hardway's topic in Body & Paint
Put me down for a set of plated. Don Pappe Seattle -
This is an extra cover I have off a 70 Z that is a one owner car. I will have to look up the serial # and month built Don's iPhone using Classic Zcar Club mobile
-
Series-1 Hatch Vent Duct Clips & Restoration Info Needed
7tooZ replied to Hardway's topic in Body & Paint
Does anyone know if the original grill were made of metal? I have put two of these together on restored cars and can confirm it is difficult to do even with help. The current grills are plastic and it is easy to snap the tabs off. The pins on the back is what holds it all together. The clip grabs the pin on the bank of the grill. We have been lucky so far as we had the original clips. If someone makes a duplicate of the original I will take several sets. Don's iPhone using Classic Zcar Club mobile -
I usually start by checking the grounds. If good grounds have someone work the switch while you put a finger on the relay. You will feel the click and usually hear it. Check all four relays. If some work and some don't move the working ones over. If still not working check the power from switch is reaching the relay. If the relay is working the issue is in the wire between relay and the lights. Recheck the grounds. Check to verify constant 12v is reaching the relay. Check the plug that routes the power from the original light harness. Seems odd that the only issue is the high and low lights. I suspect the switch or bad ground to the relay panel. Good luck Don's iPhone using Classic Zcar Club mobile
-
Geez I was getting worried. Haven't had a chance to install my system yet. This is more like I was expecting. Looking good. Don's iPhone using Classic Zcar Club mobile
-
I contacted Zcardepot twice before ordering mine from Sean. They show them on their website but don't seem to stock them. Didn't have any headers or JDM mufflers. Plus really couldn't provide much in the way of information. Working with Sean was easy considering the time difference between Seattle and France. Don's iPhone using Classic Zcar Club mobile
-
Found the last of the parts I needed locally. Thanks everyone for help and suggestions. Don's iPhone using Classic Zcar Club mobile
-
No but thanks for forwarding. Were you looking for a non working switch to use for parts?
-
$75 i can send you several and you can return the ones you don't use.
-
What is the switch out of I have several extras Don's iPhone using Classic Zcar Club mobile
-
I can attest to Sean helping decide what buy that fit my car and use. Plus answered all my questions quickly. Hoping the weather holds in Seattle so I can move the car from storage to the shop. Need to install my system plus pull the bumpers to get re chromed Don's iPhone using Classic Zcar Club mobile
-
Mine extends 1.75 inches beyond the rear bumper Don's iPhone using Classic Zcar Club mobile
-
I paid $1375.00 delivered. About 1250.00 euro. This a racing version is slightly more. And a non JDM muffler is slightly less. It saved me 140.00 sales tax Sean is really responsive PM him for advise Don's iPhone using Classic Zcar Club mobile
-
I thought it sounded like it could be an exhaust leak. Does it get less as it reaches full temp? Don's iPhone using Classic Zcar Club mobile
-
This definitely all stainless. The initial inspection says it is very high quality. So far I am extremely pleased. Next big test is the aesthetics of the noise. I will definitely post my progress. Don's iPhone using Classic Zcar Club mobile
-
The new exhaust arrived today. Sean's system is gorgeous and I am looking forward to getting the Z out of storage and getting started. Don's iPhone using Classic Zcar Club mobile
-
Thx didn't realize he had some used parts also. Don's iPhone using Classic Zcar Club mobile
-
Correction I guess I need the front differential case mount and a rear transverse link from a 280z. Anyone have one. Don's iPhone using Classic Zcar Club mobile
-
Excellent. Picked up the diff, mustache bar, stub axles, haft-shafts, and the speedometer gear from an 86 300zx. Anything else I am missing. Thx for the help Don's iPhone using Classic Zcar Club mobile
-
need a "front differential mount and insulator" for an 86 300ZX. Buy or trade for one or point me to a source. Thanks
