drmattyg

THESE PARTS MUST BE GONE BY FRIDAY. MAKE ME AN OFFER IF YOU DON'T LIKE MY PRICE. I'M ALWAYS HAPPY TO TRADE. LOCAL PICKUP IN THE SF BAY AREA ONLY. I WILL NOT SHIP. -refurbished seats in gray. 1 small tear can be easily fixed. $75.00 -n42 engine complete $75.00 -Rear MSA sway bar 40.00 -3.36 diff r180 $25.00 -Early SU carbs(front one needs needle valve) $50.00 -flattop carbs $TAKE THEM -r180 mustache bar $15.00 Stuff I'd trade for- Exhaust/header Triple carb setups Wheels Any other performance, original, vintage, or rare part for datsuns. Let me know what you have. Surprise me! I'd also trade my whole car, parts and all for an e30 m3, an e28 m5, an m6, a trick datsun 510, 1st gen bronco, a good jeep cj, or other stuff. for picts of the car, go to www.cardomain.com/id/drmattyg My car is NOT for sale however. email me at drmattyg@yahoo.com or call me at 925-788-8161

found one.

There's oil dripping from my speedo cog body on my late 5. I think its the cog body itself. Anyone got a late 5 cog body I can buy? email drmattyg@yahoo.com

you can see appliance wheels on my z in the pictures. You can also see the sats i'm selling. www.cardomain.com/id/drmattyg

i forgot to include my email. drmattyg@yahoo.com

My list of wanted and for sale Datsun 240z parts SF bay area local pickup only please. Stuff I would be happy to trade for(if you have it, but don't think I'd go for it because its worth less than what you want from me...ask. I'm easy to convince. I'm all about trading 2 of my parts for one of your part.) I'll even buy some parts for the right price... -headers and full exhaust(square port) -triple carb setups(dellorto, weber, mikuni) -set of turbo zx rims(swastica) with decent tires(or other cool wheels) -any other set of light 14 or 15 inch rims with good tires -good set of springs and struts(240z) -good F54 block with flattops(full engine even better!) -audio setups -autometer guages -front air damn(urethane) -electric fan -fog light setup -short shift kit -any other interesting, rare, or performance part TRADES TAKE PRIORITY. These parts are for sale off my 240z. If you don't like my price, make me an offer. -Set of early SU carbs with polished tops in ok condition(front might need new needle valve)-$75.00 -r180 3.36 stock diff-$30.00 -L28 engine complete-$75.00 -Early 5 speed tranny-$75.00 -280z driveshaft-$20.00 -MSA rear sway bar-$50.00 -Refurbished cloth 280z seats(1 small cut in drives seat. easy to fix)-$100.00 -centerline autodrag lookalike wheels -$150.00(SOLD) -240z points type distributor in good condition with excellent cap-$25.00 -240z intake(coolant line bent)-$20.00 -appliance style original mags(trade only for other wheels)

swastica rims with decent tires. I have lots of stuff to trade and maybe a little cash. -3.36 r180 -refurbished seats -early su carbs -full l28 engine with FI stuff -MSA rear sway bar -early 5 speed the list goes on...email me at drmattyg@yahoo.com SF BAY AREA LOCAL ONLY PLEASE.

sf bay area. i'm using a different sn today so don't get confused.

These parts are for sale off my 240z. If you don't like my price, make me an offer. SF BAY AREA PICK UP ONLY PLEASE. NO SHIPPING. Email drmattyg@yahoo.com -Set of early SU carbs with polished tops in ok condition(front might need new needle valve)-$75.00 -r180 3.36 stock diff-$30.00 -L28 engine complete-$75.00 -Early 5 speed tranny-$75.00 -280z driveshaft-$20.00 -MSA rear sway bar-$50.00 -Refurbished cloth 280z seats(1 small cut in drives seat. easy to fix)-$100.00 -centerline autodrag lookalike wheels -$150.00 (SOLD) -240z pionts type distributor in good condition with excellent cap-$25.00 -240z intake(coolant line bent)-$20.00 Stuff I would be happy to trade for(if you have it, but don't think I'd go for it because its worth less than what you want from me...ask. I'm easy to convince. I'm all about trading 2 of my parts for one of your part.) -headers and full exhaust(square port) -triple carb setups(dellorto, weber, mikuni) -set of turbo zx rims(swastica) with decent tires(or other cool wheels) -good set of springs and struts(240z) -4.11 r200 -any other interesting, rare, or performance part

haha alright, let me know what you want to do.

i'm in moraga, which is right near oakland and walnut creek. To retrofit, you need to get a manifold from a 240 or 260, and pop it on there. You also need a few other things such as a fuel rail and the linkage, but you can get that stuff for dirt cheap at a junk yard.

of course they can! Under the hood of my 240z is an l28 with early su's. Stay away from the 73 and 74 carbs though... for picts, check out www.cardomain.com/id/drmattyg

the l28 is FI, and has some of the fi stuff still on it. The engine is complete, the FI stuff is bonus. I was asking 100? I don't know what's fair though.

the early su's are nice, although the front carb had fuel shooting out the vent hose on top(bad needle valve I think) This has only happened once, but I swapped them out anyway just to be on the safe side because my buddy had an extra set laying around. The carbs ran great before I took them off except for that one incedent. Might be wise to just rebuild them. I guess I'd ask 75 bucks plus shipping although shipping to Australia seems expensive and I'd be more comfortable if you were to look at them before buying them.

i'll even buy some of the parts I need...if the price is reasonable.

I want to trade some of my stuff, for some of your stuff. I only want stuff that's is good working condition. I'll sell or trade any of my stuff. wanted: -a nice looking set of wheels, 14-16 inch with tires to match. I really like wheels that are blacked out in the center, but i'm open to ANYTHING. -exhaust 2.5 inch piping + header -3.7 lsd -triple carbs setup -eibach, tokico, or ST springs -tokico or bilstein struts -LATE 5 SPEED TRANNY!! for sale/trade: -refurbished datsun seats -rear MSA sway bar -complete l28 engine -early su's with polished tops. -3.36 r180 rear end i'm in the sf bay area in california. email me at drmattyg@yahoo.com

parts for sale: 2 reconditioned seats in gray. 1 small rip on drivers side, but hardly noticeable. r180 3.36 diff good condition 73 seatbelts with retractible lap belts 73 carbs from 240z a full 280z parts I need: 81-83 280zx dist in good condition holley red fuel pump fuel pressure regulator gtech pro or pro comp in-line fuel pressure guage make me an offer, make me a trade. Email for more info. I need to get this stuff out of my garage. I'm in moraga ca. Local deals only please. drmattyg@yahoo.com

my 14x7 centerline autodrags(may be knockoffs) with good tires for your 14 inch or 15 inch wheels with decent tires. Turbo zx rims would be preferred, but I'm open to ideas. The centerlines just aren't my style. i'm in moraga ca near walnut creek. local deals are better. drmattyg@yahoo.com

i am in moraga ca. the l28 availability is pending a trade. If the trade falls through, it is available. If you have springs to trade, then I might give you preference depending on which kind. I am looking for ST or MSA. The stiffer the better. I will let you know when I find out. ALso, its an n47 head and block to match.

alright, seats-150 diff-30 mustache bar and shafts-40 carbs-30 make offers

alright, point taken. With this, what do you think of uncut ST springs? Are they decent in comparison to tokico, eibach, or MSA?

what's the website. I am searching yahoo and am coming up with nothing. its not suspensiontechniques.com either.

i can get some Suspension techniques springs for my 240, with 1.5 coils removed. What are the advantages and disadvantages of cutting ST springs? Will I be too low and will I need to mess with steering? Will I be too stiff? Good idea or bad idea to use with stock struts? thanks for the help.

I am looking for turbo zx iron cross wheels and some Suspension Techniques or tokico lowering springs for my 240. hopefully trade, possibly buy. SF bay area is preferrable. drmattyg@yahoo.com

PSS-by nice wheels and tires I mean just some stock rims from a 280z or 280zx. I really like the stock 6 spoke looking ones from a 280, and also some of the early slotted mags. I am also willing to trade "appliance" style wheels for either of these. take your pick. All I'm looking for is a new look. I am willing to straight up trade. drmattyg@yahoo.com