joe newsom
Free Member
-
Joined
-
Last visited
Everything posted by joe newsom
-
Hello Everyone, I am looking for some help with some where to set my 123ignition centrifugal curve and MAP curves. I have a 280zx block with N42 head that has upgraded cam. I am running Z Therapy Carbs. i was hoping to get some number that are a good starting point. -
Finally got my car finished. The last toy I got built for it was a custom box so I can leave the stock stereo in. With this box I can listen to my tunes through Bluetooth Sent from my iPhone using Classic Zcar Club mobile
-
Trying to find some car shows in the North West, any recommendations? Sent from my iPhone using Classic Zcar Club mobile
-
Any recommendations for good fitting car covers ? Sent from my iPhone using Classic Zcar Club mobile
-
Getting closer to the finish line Sent from my iPhone using Classic Zcar Club mobile
-
Never mind figured out it does, mine is just severely corroded:) Sent from my iPhone using Classic Zcar Club mobile
-
can this piece be separated?
-
Patcon did you replace the orings and bushings? if so what was your source?
-
Any tips that you can suggest for rebuilding? Sent from my iPhone using Classic Zcar Club mobile
-
Can this part be rebuilt? Sent from my iPhone using Classic Zcar Club mobile
-
Found some at z car depot Sent from my iPhone using Classic Zcar Club mobile
-
Anyone know of a good source for inner kick plate screws ? Sent from my iPhone using Classic Zcar Club mobile
-
Thank you for the help Sent from my iPhone using Classic Zcar Club mobile
-
Yep I thinking the same Sent from my iPhone using Classic Zcar Club mobile
-
So I am having a hard time with my front 71 front bumper. I have sent it off to be re plated by a local plater. However it has always seemed to flexing like someone hit something head on. The plater is having a hard time bending back to what I think is normal. So my question is to you guys, is it normal for the front bumper to be 1 1/2 in or so away from the mounting holes ? Sent from my iPhone using Classic Zcar Club mobile
I am having a herd time locating my membership number. Where would this be hiding? Sent from my iPhone using Classic Zcar Club mobile
Thank you the info is very appreciated Sent from my iPhone using Classic Zcar Club mobile
Measuring it would help a lot thank you Sent from my iPhone using Classic Zcar Club mobile
Yep this helps. Now just to locate a plastic washer like that :) Sent from my iPhone using Classic Zcar Club mobile
Went to the chrome shop today to pick up some bumper parts. Thought it was cool to see some of the pieces in copper Sent from my iPhone using Classic Zcar Club mobile
Hi guys, I am assembling the seat belts and noticed the belt that fastened to the top seems to be missing something. To me if I tighten the bolt down it is just going to crush the plastic. Am I missing something? Sent from my iPhone using Classic Zcar Club mobile
I believe I got it on eBay. As far as the fibre board, I used my old ones. I straightened them and reinforced them with fiberglass... Sent from my iPhone using Classic Zcar Club mobile
Yes it is. Sent from my iPhone using Classic Zcar Club mobile
Couple new pics of the interior coming together Sent from my iPhone using Classic Zcar Club mobile
Important Information
By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.