Jump to content
Remove Ads

Gators280z

Free Member
  • Joined

  • Last visited

  1. Gators280z posted a post in a topic in Electrical
    Patcon, the black rockford cable is connected to the lower starter bolt Sent from my VS995 using Classic Zcar Club mobile
  2. Gators280z posted a post in a topic in Electrical
    Ok so I moved the body ground just now and I'm still not getting 12v but as it shows, I'm only at .2 on both of those. The other two had no volts rather
  3. Gators280z posted a post in a topic in Electrical
    Ok so I just those fuse links and I have no power on either side on all four of them. What would that signify Sent from my VS995 using Classic Zcar Club mobile
  4. Gators280z posted a post in a topic in Electrical
    Versed Sent from my VS995 using Classic Zcar Club mobile
  5. Gators280z posted a post in a topic in Electrical
    Thank you so much. I'm not really cersed in auto electrical problems Sent from my VS995 using Classic Zcar Club mobile
  6. Gators280z posted a post in a topic in Electrical
    Ok ill give that a shot tonight, if not ill let you know Sent from my VS995 using Classic Zcar Club mobile
  7. Gators280z posted a post in a topic in Electrical
    So I just double checked and I'm actually getting no power to the fuse box at all. I'm sorry for the confusion Sent from my VS995 using Classic Zcar Club mobile
  8. Gators280z posted a post in a topic in Electrical
    No volts at all. Also, there is no power to anything in the car. I can't even get a turn. It makes me feel like maybe there's an uninstalled wire but even then I should at least get some form of power through the system Sent from my VS995 using Classic Zcar Club mobile
  9. Gators280z posted a post in a topic in Electrical
    Dave, yes I do and it should also be stated that the battery does have charge, I made sure of that Sent from my VS995 using Classic Zcar Club mobile
  10. Gators280z posted a post in a topic in Electrical
    Ok, so I took on the task of rebuilding my perfectly running l28. I got it out had the motor redone and put it back in. That was all, for the most part, easy. Then I go to start the wiring procedure. I have a diagram and I followed it to the most of my abilities. When I got the car, it had quite a few wires unconnected in the first place so I had left about 4 wires unconnected. So here comes the problem; I have no electrical power running at all through the car.I'm talking no headlights, no dashlights, no start lights. Nothing at all. This is the last step before I prime engine and go. So please if anyone has experience with this or knows what else I can do please comment. Ill explain anything if you have questions. Thank you so much Sent from my VS995 using Classic Zcar Club mobile
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.