Obie 280Z

Sounds like zeeboost has more of a need for the harness. Mine is functioning fine, just old and have a new MAS. Would like the fuel rail if it's not a fortune to ship to ATL. Maybe we can figure out shipping Monday? Sent from my iPhone using Classic Zcar Club mobile

I would be interested in the grill, fuel rail and injection harness. I would be only be replacing worn parts so let's see if someone needs them as primary parts. Thanks Sent from my iPhone using Classic Zcar Club mobile

Thanks for the feed back, we went ahead and put the aftermarket in since I couldn't leave car on the lift. They look just like national seals. Should have done more checking for a lower prices on the OEM like link u sent. Drove about 20 miles and no leaks but will check them again next time I have the car off the ground. Thanks again.

Changing out side seals on 77 280 R200. Seals I ordered from Z car depot quite a bit more narrow but correct dia. Will they work? Did confirm with auto zone they are the correct Part number. OEM can be purchased for about $86 per. new seal on left. Thanks and sorry for posting in 2 places. Sent from my iPhone using Classic Zcar Club mobile

Old, damn phone Sent from my iPhone using Classic Zcar Club mobile

Correction on seal on right Sent from my iPhone using Classic Zcar Club mobile

changing out leaking side seal in R-200. Tim ken bearing from z car depot quite a bit thinner. Will it work or should I go OEM. Old seal on left. Thanks

If u don't need let me know. I'm missing one Sent from my iPhone using Classic Zcar Club mobile

Dave, if u do make the north GA ride on Black Friday send me a message as well. Would love to meet up w/ u and maybe others for a drive. Just starting to get to know some folks on web site and all my suspension work will be finished. I'm in the ATL area as well. Sent from my iPhone using Classic Zcar Club mobile

Mine is a 77 with a N 47 head. Sent from my iPhone using Classic Zcar Club mobile

Have a picture of the recoated header. Is it from MSA ? Might be interested. Sent from my iPhone using Classic Zcar Club mobile

The powder any job-shop or coater would normally use for this type application would be thermoset therefore u are good to go in that respect, most likely a TGIC or a urethane, both polyester resin. Epoxy powders will give better chemical/ gas resistance but will chalk eventually. Most solvent born coating would be in the 1-3 mils. range (DFT) and powder could be 2-10 mils depending how heavy handed they were. 2-4 mils powder would give your great look and protection. Sometimes tight tolerances and powder can be a problem unless masking/ plugs are used. Sorry for the details, been in the coating business for a while. Sent from my iPhone using Classic Zcar Club mobile

Absolutely beautiful. My color too. Hope u get every penny of your asking price. Good luck. Passing this to an Austin TX contact that might have some interest. Sent from my iPhone using Classic Zcar Club mobile

Will be at Z National, may have already met u at some of the Caffeine and Octane shows. White 77 280. Thanks , David H. Sent from my iPhone using Classic Zcar Club mobile

I live in the ATL area, can't wait. Sent from my iPhone using Classic Zcar Club mobile

Wow, that car is a keeper for sure

What a rebuilt. Very impressed with work. Sent from my iPhone using Classic Zcar Club mobile

I would be good for 280 or Datsun Sent from my iPhone using Classic Zcar Club mobile

Thanks for sharing your story. I am new to this forum and enjoying all the info. You and I are about the same age, 63 and I am on my third Z. A 1977 and 79 when I was much younger and a little more crazy. Now with my second 77 that I have owned since 2000. Having a lot of fun once again restoring it. Thanks again for sharing. Sent from my iPhone using Classic Zcar Club mobile

U can text or call me at 404 713 2214, thanks

Could u give me a call at your convience and we can work out details? 404-713-2214

Can u confirm the diameter. Looks like same wheel at Summit for $99. Not called a signature, and 12 " which would be too small I think. 13" would be ok. Sent from my iPhone using Classic Zcar Club mobile

Will get back to u shortly, looking for drop in fit for 77 280. Is everything included, working horn button? Thanks

Still available? Sent from my iPhone using Classic Zcar Club mobile