JMT240KGTR

I'm sure that's a Yoda quote...

Yamahacam, Try this guy, spoke to him last night, he reckons he'd go to $6K but wants the car to stay in Oz... 1978 Datsun 240K Sedan | Cars, Vans & Utes | Gumtree Australia Maroochydore Area - Palmwoods Get onto it quick before it ends up O/S, pretty much no work required!

hahahahahahha! classic!

Pretty nasty stuff... hmm, strip it, start work on it, fabricate some bits that need replacing. In the meantime you may come across a better shell, if not, at least you'd have made a start on this one. Lot's of work though...good luck.

yeah Adzmax, eBay, was only listed for a minute when I grabbed it!

Ha! Didn't have a horse available, had to use a rabbit anyway, don't think this will end up too modified, it's 100% original and in top order, perhaps a couple of touches but definitely no engine swaps! L series all the way!

used the guys heaps, competitive, good price, good insurance cover, etc etc well recommended... Car Transport | Car Transport Interstate | Car Transport Australia | Car Moving | Car Carrying | Vehicle Transport | Motorcycle Transport | Light Commercial Vehicle Transport | Ceva Car Transport Logistics - Australia's Vehicle Transport Professi

Price was a little more than the starting price, I made him an offer he couldn't refuse I'm in Melb Sth East, same as you, you're more than welcome to come check it out from next week, be good to meet more K enthusiasts

Just thought I'd share, gotta be quick on eBay these days, and get in like 1 min after it's listed so as to cut out the overseas interest! This is mine (well it will be when it's in my hands early next week), being picked up this morning It's a beauty!

That's awesome mate! Yeah OK, sounds like a plan, I've sent you a PM. Cheers

Hi guys, Wondering whether anyone in Melbourne (preferred) or Vic has a 240K dual pipe exhaust manifold they'd like to part with. I'd consider extractors as well. Cheers, thanks

Had this prob before...try changing the barrel. At the rear of barrel are 2 small screws, that'll release it. If this doesn't change anything, get yourself a light tester. Check wires rear of ign barrel. From memory the blue wire powers up first when placed in ON position. Then the red/white powers up as well in START. I may have my wires crossed regarding colours (pardon the pun), but I had ended up bridging these two wires and everything worked fine. Good luck

Hi guys, These days you never, or very rarely see a 240K on the road, but the other day I spotted one, wonder whether it belongs to anyone here? Spotted in Bayswater, Vic. It was a silver coupe with jelly bean mag wheels, looked fairly straight and in good cond, I just couldn't make a U turn in time to follow it! It was sitting on a flat bed tow truck, heading south down Bayswater Road. I'm really kicking myself now that I didn't make more of an effort to follow it! Be interesting to see if it belongs to a fellow from here! Cheers

Have you re-located the oil pickup strainer to the 240K sump pickup point? 2 ways of doing this; A or B A . You'll notice at the bottom of the block there is an identical 'tab' on the L28 block which is located in the same location as an L24 block. This 'tab' needs to be drilled until you reach the oil gallery which runs alongside the block. You'll then need to tap thread holes to mount the oil strainer. Then block off the original L28 pickup point. B . From the original L28 position, extend the pickup arm so that it fits exactly within the L24 sump. This can be done by cutting the pickup arm, and brazing another piece in. This I guess is the easier option but you must be sure the pickup fits deep within the sump bowl. As for the dipstick, some simply relocate this to the side of the sump, I've gone down the route of drilling into the forward section of the block and having it looking all original. Good luck

unless it's what many others also refer the C210 as a 240K, in which case it is a 3.9....