krZing

Can someone please identify where to plug this connector labeled LW/R/LR

Currently no dash lights no park lights. That connector located under the dashboard behind the fuse circuit. Check the continuity from that connector to the white and green cut wire in question from my original post and there’s a continuation. Also there’s a continuity with the blue/green and the missing wire on the second picture when combo switch is in park or on

Sorry 7tooZ red and blue not solid

Green and white and I think solid red

Hello guys I finally tracked the green wire but not sure ? where this connect to.

Hi 7tooZ. Thanks I’ll check it out

Hey Captain thanks for your post. I was the one that opened the circuit because head lights were not working so I cleaned the carbon built up. Now headlights are working. I was just trying to figure out the green and white wire. See my previous post. Thanks for any advise

Ok ? thanks

Steve do you suggest to switch those green wires and replicate what siteunseen posing

Hi steveJ. Could it be the green and white wire from my original post? Currently no running lights/taillights thanks for your reply

Siteunseen. By just looking at the images you post. It look similar to mine except the green and wire wires. Could the P.O. possibly switch the location. See picture and thank you for replying

thanks siteunseen for your post. I will check it out

Thanks for your advise. I keep you posted with my progress. If any?

Thanks for the motivation Steve.

Deng ?I need all the luck. downloaded lots of diagrams and trying to understand it. Difficult for an amateur like me

No kidding ?. I know what you mean Steve car info below

Can someone please help me identify where this green and white wire connected to. Not sure why the PO cut this wire. I think it’s for the horn but not sure. Thanks

Just a few drops on the floor after driving. By when it’s not driven I don’t see leaks.

Not sure if leaking from the oil pan or transmission

The diagram Look intimidating but I will try it this weekend. I’ll post an update. Thanks

Thanks Zed. I did pulled out connection and clean it but still have the same issue. Maybe I’ll try to change the connector with a new one and see what happens. I will give an update once it’s done

Thanks Steve any help is appreciated. I don’t have any experience when it come to electrical I hope you can direct me to get it running

Help! I got me a 73 240z. I did not have problem starting the car before but recently I when I start the car I only hear a click from the relay.Changed the ignition switch but no improvement. Clean the wires connected to the solenoid no change. But when I jump the solenoid the car starts. Any ideas?see5E94E238-BAAB-4D40-B43E-60EF75304AF1.MOV video. any help is appreciated.

Help! I got me a 73 240z. I did not have problem starting the car before but recently I when I start the car I only hear a click from the relay.Changed the ignition switch but no improvement. Clean the wires connected to the solenoid no change. But when I jump the solenoid the car starts. Any ideas?see5E94E238-BAAB-4D40-B43E-60EF75304AF1.MOV video. any help is appreciated.

I’m new here not sure how I got here