Everything posted by BLZ71
-
engine/trans help
I'm back, now I need to know how to break the flywheel bolts loose, the crankshaft turns
-
engine/trans help
Not sure what I would do with out all your help, sure enough the two greasy little screws were holding me up, also put the floor jack under to level it out and it came right off. Thank you.
-
engine/trans help
I have the engine out with the trans bolts out and it's separated about a 1/2" from the bell housing. I can't seam to get the trans completely separated Any ideas ?
-
BLZ74
David, The next time you're over here visiting your brother give me a call 206.953.1910. I would love to see your car, I go back to Edmonds usually Tues. through Thurs.
-
BLZ74
Where can I get info on the MSA air
-
Vin Verification
I Kinda thought so, I will have to measure for the exact location and drill a new hole in a new patch. Good thing my son is in Paint & Body for a living.
-
Vin Verification
-
Vin Verification
The door (pillar) tag says the same as the vin 41253 on the top right of that same tag there is a 3 or 8 or S I can't make it out
-
Vin Verification
I'm still unsure when my 71 was built, I understand that the early 71's had vents on the back hatch. Mine doesn't have them, I'm sure it's the original hatch, the color matches the rest of the interior paint. Were there ever vents on the rear quarters VIN HLS30-41253
-
engine removal
Cool, I am headed to Harbor Freight for a chain lifter.
-
engine removal
I might just put the exhaust manifold back on, I got a little ahead of my self.
-
BLZ74
I moved yo East Wenatchee from Edmonds about 3 years ago, I go back to Edmonds for work just about every week.
-
engine removal
Early Pictures as promised,
-
engine removal
-
BLZ74
do you use the same stock heater & blower with there air kit
-
BLZ74
I will definitely check it out, this is all new to me, I live in eastern Washington were the summer are in the 80 & 90's air will be nice
-
engine removal
r Thanks for your help, I will be picking up the cherry picker tomorrow, it looks like it should be pretty straight forward. I hope you guys don't get tired of my post
-
engine removal
What I meant, I'm not sure I have enough length in the garage to maneuver the engine, puller & tranny altogether, but my wife said just open the ...... garage door.
-
BLZ74
I thinking of adding a Vintage air kit to my car, would this eliminate the need for the factory heater stuff under the dash ?
-
engine removal
I'm also getting ready to remove the motor in my 71 240z project, I was going to separate the tranny from the engine because I don't have a lot of room in my garage. Will this be okay ?